Search Results for ‘failure’

Hi John-- I've been using Equalizer-APO/rePhase in a tweak/measure/tweak/measure loop with REW. Each tweak requires re-generating an impulse response file for the convolver. But when I regenerate an impulse file, I have to restart REW. Other players (FB2K) stop the song they're playing, but...

I'm using a Behringer DSP 1124P to equalize my subs. Set it up 8 months ago and haven't touched it since. I recently started to suspect something wasn't quite right with the bass, so I fired up the test tones on my receiver and noticed that the usually constant "white noise" from the subs was...

I have 2 Epik Empires and one of the plate amps kicked the bucket sometime in the last 6 months. Don't really know when it quit working because I never ran them hard and the light still came on, just no output. :paddle: I bought a Behringer RU6000DSP and need to pickup a USB measurement mic and...

Similar problem as some Criterions from 2009-2010. The date range for these appears to be April 2010 to October 2011. -------------------------------------------------- Blood (03/22/2011) Brothers Five (04/27/2010) Delightful Forest (04/27/2010) The Heroic Ones (04/27/2010) Ip Man...

This has been reported on several other forums and Criterion has been contacted over the issue. it seems that a bunch of Criterion titles that were pressed in 2009-2010 were done at a pressing plant that messed up the discs and they are showing disc rot. the signs for this particular failure are...

I did something stupid the other day. I was on the Samsung Support site looking for help with a different issue (white dot problem that Samsung is taking care of), and I noticed that there is a firmware update. Having never done so before, I decided I might as well give it a shot. I loaded it up...

My 2113 is having shut down and HDMI issues. It is in the 30 day time frame so I'm sending it back. I saw the Sherbourn SR-120 is on sale. How would that compare to a Marantz SR5007? Nearly everything I have is analog so I need the up conversion. I'm running A5 towers and A1b center and...

I own an Onkyo TX-SR607 that intermittently would not display the setup screen. I could get it back by doing a factory reset until recently when nothing would get it to show. I had been meaning to get it repaired earlier in the year until health issues became a higher priority. :sick: I made...

Folks, I just had a 1 year old 2TB Iomega MiniMax fail on me. I use this to store my music. It is connected via USB to a 2009 Mac mini. I backupped only on August 27. The five days after that, I had been very busy adding over 100 albums and moving some stuff from the internal HHD on the mini...

Below is a list of Normal convergence failure components courtesy of SLR_65 :T _________________________________________________________________________________________________________________ PT-56WX53G Hi Guys, As I come across info on various models I thought I would post it here for...

Hello, I finally got around to doing the IC/resistor repairs on my 53swx01w but unfortunately my repair did not resolve the issue. Everything is the same as what it was prior to my starting the repair. I can move all the colors except red which will not move right and left, and is currently...

My Samsung RPTV Model: SP62T6HCX/XSG Chassis: J54A The Set emitted a high pitched whine and would not power up Noticed a coolant leak from all three tanks Fixed the coolant leak The set still emitted a high pitched whine and would not power up Noticed some coolant leaked on the...

My BFD has been serving us well for the past couple of years. We had a power surge last week and now all VU levels are pegged at the top. Still works just not at the programmed values. Some of the forum members have recovered from similar situations by powering down and back up...

Hello, I have a Panasonic PT-53TW53 53 in. Rear Projection HDTV. Recently, the TV would not power on and flashed the service code indicating a problem with the convergence circuit. After much research on the net (mainly the great thread here by lcaillo - Thx!) I decided to tackle the repair...

Having problems with my DVD player. Every time we use it, I have wriggle the optical cable where it plugs into the player to get 5.1 working (otherwise it defaults to Pro-Logic). Naturally I’d first suspect the cable, but I threw out another one just a couple of years ago and replaced it...

So I went and did something stupid.. I was fiddling with my piece of garbage DVD player and had the svideo out from it going into the front input on my 55" mitsubishi. I fumbled with the power cord and sent some 120 through ground on the dvd player chassis and I assume through to the tv set...

Well... I know you guys may not believe this, but Angibug came home with this movie this afternoon and said we were gonna watch it tonight in the HT room. I couldn't believe she actually wanted to watch a movie. :blink: I'm not much on romantic comedy's but I'll watch them. I've even watched...