Search Results for ‘fan’

Hello all the friends, I've already participated here on this forum, and now I am among your friends, I love the movie and music, so I've always kept a hometheater at home, I want I could get the cinema sound at home, but still not succeeded, maybe there's no more information, I have the onkyo...

My crown I-tech 4x3500HD amp is installed in a server rack in my living room and its too noisy. The fans on this amp run constantly (this is normal on these amps) and spool up and down as needed (no error with their operation) The amp has two fans, the one that cools the amplifier modules is a...

I have had my Behringer iNuke NU6000 for right around a year now. The loud fans have always bothered me when listening at low levels in my HT. Just last week I made an upgrade in my AV cabinet to include some more powerful fans. The result was the cabinet air temp right above the AVR runs at...

New member here. I decided to contribute the work on my modest home theater as some of it may be of use to others. There will be no dedicated theater room additions or new home build journal so set your expectations accordingly, haha. Quick background about me... I’m an electrical engineer in...

I am more than likely going to buy the Crest CC-5500. I have looked and cannot find what people have used to replace the fans. I am sure its not that big of a deal having replaced the fans in an Inuke 3000DSP and Crest ProLite 7.5. Any ideas suggestions??

Thought I'd share with yall. Just finished up my Behringer inuke3000dsp fan mod. Used 2 200mm Scythe 700rpm fans. With assorted screws and nuts. I can post sizes if anyone is interested. All comments welcome. Enjoy.

I've been a home audio enthusiast for quite awhile. I just recently built my first DIY 4cu foot flat pack UM18-22 sealed sub-woofer from P.E. with an Inuke 3000dsp. Looking at all these awesome fan mods have inspired me to do my own. However I could use a bit of help. Currently I have made my...

Introductions: I'm not very new to HT, been working on mine since the mid-90's.. But I tend to upgrade in spurts and live with it for years before going through another "growth spurt." At this point, I'm pretty happy with my setup, except the subwoofer amplifier. So it's time for another...

The Ultimate Behringer iNuke NU3000DSP Fan Mod (CLICK HERE FOR PICTURES): After purchasing an iNuke, I found the stock fan far too loud for home theater use. I liked seeing what people were experimenting with here (slower fans, inline resistors to slow down the stock fan, natural...

I have also posted this on another forum but, so far, I have not received a reply. I hope someone has experienced a similar problem and can advise me. I recently modded my EP4000 and installed a quieter fan. I cut the existing wires and spliced in a new fan using a connector to tie the new fan...

So... I gave up on Onkyo figuring out how to turn in the included fans on my tx-nr929 receiver. The internal fans just literally pop in for the briefest fraction of a second and then spin down, waiting for the next bass incident to repeat. Annoying and potentially "HDMI Board Frying".... I...

Hello Fellow Forum Members, We just started a XTZ Sound USA Facebook fan page. We will be posting special discount codes and free giveaway promotions on a regular basis. Please like us by clicking here.

$25-shipped for a 2-pack of Noctua 80mm fans. I went from 77dB to 50dB. I even forgot to add the inline resistors to slow the fans down. But there's no point. The amp is almost silent as-is. But I can still add the resistors if I feel the need w/o any cutting or soldering. I don't have my subs...

My Behringer NU6000DSP stopped memorizing the settings after powering up and uses some previous one. It reacts to new settings but after power down looses them. It has been 2 months since purchased and it goes for repair back to the retailer. The problem is that i also changed the fans, i will...

I just bought a peavey ipr2 7500 to replace my ep2500, i did the fan mod on the behringer and it was very easy so I'd like to do the same with the peavey (I assume it'll be loud as well). I can't really find good info on the peavey however, all I really need are the specs for the fans so I can...

So I am about 99% dialed into a "MartyCube" build using a Dayton 460HO 18" driver with a iNuke 3000 DSP. The iNuke will be bridged and set to give a max of 1100 watts to the Dayton. Here is my question. I see some differing info on what the stock fan's voltage is on the iNuke. I plan to...

I am about to change the fan but i cant break the cable connector loose, it is glued :( The thing also is that there is glue right there where the locking tiller is (on the right side of the image). Has anybody overcome this problem? Here is a foto:

I have a quick question before I do the fan mod for the QSC 1850HD. I have the digikey replacement fans that have been recommended. My question is about the connector where the fan mates to the QSC's circuit board. Can I order the connector so I don't need to cut the wires on the original fan...

I am hoping to gain some insight here on this issue which started this morning and has resulted in several calls to Samsung tech support, reaching out on samsungs tech support facebook page, and fairly thorough search of the internet. I apologize in advance if this is an issue that has been...