I have an old ONKYO av, i left off two channels of the auto cal, center and sub(sub no diferrence with audyssey) I have now two filters in the sub channel, i will upload the results because i have stuck ... I also recal. the distance fοr the sub . My coach is also stuck :D to the...

Ihave already bought this and i made all the right connections but i believe that i fell into faulty item. Ι check -call. all the levels (in-out) with the -10db and works fine. I enter the filters(4) into the left engine -PA- and save them. also the rest filters(8) set them in the OF option...

Hello, me again. Don't have a MIDI cable yet so I'm setting the filters of my FBQ1000 manually. I've set REW for a DSP1124P as it seems close to the FBQ1000 for the controls and configuration. The question I have concerns the bandwidth parameter. In REW I have a PA type filter with BW/60 =...

Hello Gents, Was trying to find the latest midi USB interface everyone prefers and where to buy. I've tried several times with an older (2yrs) roland UM1 to interface between a windowsXP laptop REW and BFD1124P. I'm usually pretty good with PC's and device driver problems, but this one was...

Hi, my name is Ariel, and I'm from Argentina. I only speak Spanish, and now I am using a translator. I do not know how to solve the problem I have with my FBQ2496. I only listen to music when the BYPASS function is active. When I turn it off, everything shuts up. Can anyone help me please...

Hi I have set my filters and the corresponding filter lights are lit. My question is, do you leave it in some sort of mode after you are all done. Do you leave it saying "run"? Or do you press the freeze button or something? Thanks for your time.

I have found the Sabine GRQ-3102S. I was able to pick it up off ebay for under $80 shipped. It is an option instead of the BFD, SMS-1, or Anti-Mode.... It is a graphic/parametric equalizer (plus more) that you control by computer. There are no flashing lights or anything distracting. You can...

I just purchase a fbq2496 for my dj sound system. It will be connected to my low sub for feedback problem. I need some help on programming it. I would like to use the parametric eq 30 - 90 hz for bass boost with feedback destroying for my mic stage at live events. Could you give me some help...

I have a problem with FBQ 2496. After power off/on filters are not in use. Output response is flat, same as with bypass. Front panel leds show that filters are in use and if I check those show correct values (Hz, dB etc). In order to get those taken in use I need to go and touch each filter...

Big time newbie here so please go easy on me. :dontknow:I've got bfd and plx2402 amp that I bought several months ago.We are building a house so I have just been buying a little along the way.Well we are very close to moving in and I'm wanting to put the finishing touches on my equipt.What else...

I am about to but one of the units but I have some questions: 1) Neither the parametric filters frequencies values nor the fine tuning values are indicated in the FBQ 2496 manual while they are very well explained in the DSP 1124 P. What is making me think they may be different is that the...

I see the FBQ uses a more powerful processor. Would it provide better performance then the DSP1124?