Home Theater Forum and Systems banner
fbq1000
1-8 of 8 Results
  1. Electronic Processing/Equalization Devices
    After some discussion about EQ solutions for various applications in another thread, I found myself in a unique position to get some impressions of the FBQ-1000. It was alleged that the old model, the Feedback Destroyer DSP1124P, was noisy and therefore unsuitable for use in equalizing L/R or...
  2. Electronic Processing/Equalization Devices
    I've a FBQ1000 in my home theater installation for the sub. It works fine but since all my equipment is remote controlled except th FBQ, I wanted to use a remote controlled power switch to turn on and off the unit. The FBQ power switch left at the ON position and the remote controlled relay...
  3. Electronic Processing/Equalization Devices
    Hello, I'm new to these devices and don't have experience with other models but couldn't figure out why the parametric filter settings were not active after power on. I'm only using the left channel for a subwoofer so I firstly set all the filters on both channels of off. I then configured 11...
  4. Electronic Processing/Equalization Devices
    I have a BFD FBQ1000 that is not loading settings from preset after being powered off. Verified with REW via RTA and measurement sweeps. Only way for settings to take effect is to put unit into bypass mode then back to operation mode or make a change and then change it back. I tried leaving...
  5. Electronic Processing/Equalization Devices
    Hi guys, I just bought a FBQ1000 (the 'new' DSP1124) and I have 2 different humming/distortion problems (at least I think it are 2 different problems) problem 1: As soon as I turn on the volume knob of my AVR I get a humming noise on my speakers. It is NOT there when I FULLY turn down the...
  6. Electronic Processing/Equalization Devices
    I have a MFW-15 in my small media room that I am finally getting around to EQ'ing as my Turbo Kit is on its way. I have been using Audyssey exclusively to tame the resonances up to this point. My buddy has a SMS-1 that he is going to let me borrow and I’m going to purchase a Feedback Destroyer...
  7. Electronic Processing/Equalization Devices
    Sir, I want to know that behringer fbq1000 is compatible with midi control rew software for subwoofer equalization.
  8. Electronic Processing/Equalization Devices
    Hi guys. Quick question for my first post. I am considering buying the Behringer FBQ1000 over the DSP 1124P. I have examined the specs for both as fully I could. They are both current products on the Behringer website. Both units seem identical except for the obvious model number difference. Can...
1-8 of 8 Results
Top