Home Theater Forum and Systems banner


  1. REW asks for Umik-1 calibration file every time

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi forum-- Why does REW make me look up my calibration file every time I start it? Can't it remember this? Am I doing something wrong? Thanks, --Myles
  2. Do I need a Behringer ECM8000 Cal file?

    REW Forum
    I did some searching here and a brief amount of reading. I get the impression that I need a calibration file for my Behringer ECM8000? Any helpful hints? Regards, Dan
  3. Load Text file into EQ?

    Electronic Processing/Equalization Devices
    So i've translated frequency response graph from picture i found on the net.I've did it with webplotdigitizer.Now i want to load that graph(text or csv file) into eq vst that can read these settings ,what eq should i use,i've tried Curve eq but it cant read it well like it have some different...
  4. Superlux ECM 999 calibration file

    REW Forum
    Hello, Has anyone used Superlux ECM 999 condenser mic for measurements ? I am interested in the calibration file for this model. If there is no calibration file available, can I calibrate it myself? Have great day, Dacian Foca
  5. REW says no cal file for cross spectrum umik1

    SPL Meters | Mic's | Calibration | Sound Cards
    Just got new umik from csl. After REW sees it and I point it to the first 0deg file supplied with the usb sick, REW puts up a mssg box that says it doesn’t contain a cal file. I’ve emailed csl but I figured I’d ask y’all while waiting for a response. Thx! Btw...have y’all done a measurement...
  6. I need calibration file for my rode m5 mics

    REW Forum
    I need calibration file for my rode m5 mics is anyone willing to make them?
  7. Dayton Audio RSS315HO-44 12" winisd pro file

    DIY Subwoofers - General Discussion
    Hello, I've been trying to follow the instructions in Winisd pro to get the Dayton Audio RSS315HO-44 12" sub from parts express to be entered, but something seems wrong (compared to what the preloaded files look like). Would someone be able to attach it here? I wanted to do some modeling for a...
  8. Microphone calibration file in REW

    REW Forum
    If there is a better thread for this type of question, please point me their direction. I'm trying to learn REW to do some room treatment measurements, and have a question about calibration files. I have a Dayton EMM-6 microphone that I purchased through Cross-Spectrum Labs, that came with...
  9. no sound after loading rew file into minidsp

    REW Forum
    so i have been fighting this issue and could not get it figured out. I first thought I had a bad board in my minidsp 2x4. but I reset it to factory and it worked with audio going through it. when I import the rew file into minidsp all the levels for all filters are -10 to -15 Db and I end up...
  10. can't remove or apply calibration file

    REW Forum
    Hello I use REW 5.16 and I've got a problem, when I make a new measurement I don't have the button " change cal.." in the measurement panel,,,, is there an issue ? thanx a lot
  11. Import Impulse Response - File Formats

    REW Forum
    Dear all, I am importing impulse responses in WAV format quite often but it seem that REW supports 16bit only e.g. 48kHz 24bits - not supported (even I set the sound card settings to 48kHz) 48kHz 16bits - fine 44.1kHz 24bits - not supported 44.1kHz 16bits - fine, even if the current sampling...
  12. Create FRD file with minimum phase applied

    REW Forum
    I am making gated measurements of individual drivers mounted in the loudspeaker enclosure at a distance of 1 meter. I am using a UMIK-1 with its calibration file and also a seperate tweeter as an acoustic timing reference. My goal is to export SPL and MINIMUM PHASE measurements of individual...
  13. UMIK-1 calibration file

    REW Forum
    Hi can someone please tell me if the Minidsp UMIK-1 calibration file is 0 or 90 degrees Thanks
  14. Dayton EMM 6 and calibration file

    REW Forum
    Hi everyone. I am new to this forum and have been fiddling around with REW for quite some time. I started using the mic provided with the Yamaha preamp, but I have now purchased the EMM 6 from Dayton. I'll soon be getting the phantom preamp to have it working correctly, but I was wondering if I...
  15. REW and .frd calibration file

    REW Forum
    I've been out of tuning for about a year and now would like to tune my cars audio system. I have forgotten how to get REW to recognize the .frd calibration file from CSL. Could anyone shed some light on this?
  16. mdat file format

    REW Forum
    Hello, Is there any information available as the format of .mdat files? I have a few hundred mdat files that I would like to export into interactive graphs, and it would be of great help if I could extract series data directly from the files and not have to open and export as txt for each file...
  17. When is the mic Cal file used?

    REW Forum
    When is the mic Cal file implemented? Hi all, I have not been following REW development as closely as I used to, but I noticed that the calibration file for my SPL meter/mic (Galaxy CM140) has been updated since I originally downloaded it several years ago. Yea, I know that a USB mic is more...
  18. Slow file open from network location--Bug?

    REW Forum
    I use REW both on my desktop, where I conduct most of my analysis, and my laptop, where I do all the measuring. To facilitate synchronizing files between the two systems, I want to store the REW MDAT files on my network attached storage (SAN). This should be a reasonable request. However, REW...
  19. Speaker calibration file - REW

    REW Forum
    Hello, I am now ready to take measurements, but one thing makes me frustrating. Calibration SPEAKER. Why there is nothing about that in preferences of REW. Of course there is EQ and things like that, but why I cant just load calibration file for speaker? Probably, it is important which...
  20. Speaker calibration file in REW

    REW Forum
    Good day everybody, I have a question regarding the calibration of my speakers. I want to measure the Impulse-Response of several rooms with REW and I have an external USB Mic (UMIK-1) and an external speaker, all connected directly to the laptop. In REW it is possible to account for the...