Search Results for ‘firewire’

IT seems that my particular set-up is hokey with REW and I need a Workaround. I've already read the workaround article at: https://cycling74.com/soundflower/#.WGpZEtzWF0k However, it seems that Soundflower is no longer supported or I can't find it. Here's my current set-up... pretty...

I'm familiar with some of the pro audio interfaces out there, but I was wondering if anybody makes one for measurement purposes. That is all I will be using it for. Something with an IEC power inlet would be ideal. So far I'm considering a used Presonus Firestudio or Focusrite Saffire. But...

So i have been going through the post here. Does REW work with firewire, IO device is presonus Firemobile? I have ordered a bilingual cable to connect to the firewire800/400. musicguy

I realise this is donation code, and really appreciate the authors' efforts, but does anyone have the magic fomula to get REW to run under OS X Snow Leopard with an external firewire soundcard? I've installed REW 5.0 under MAC OS X Snow Leopard and also under Windows (under VmWare) on the same...

Dear all, I am located in Germany and I am using REW to opimize my home-recording room in order to record and mix songs. I installed the REW on my desktop and performed some measurements, which seem to be off compared to measurements from peers. It seems that the spectrum of the low...

Dear forum ! I recently got REWV5.0 to make a measurement in a studio. I was happy to find an acoustics software that works for Mac! I have a G4 Powerbook with Tiger 10.4.11. I would like to calibrate my soundcard, but it does not work. I connected it right, there is no feedback. I got signal...

I'm trying to use REW on my macbookpro. The setup is: MacBook Pro 2.5 Ghz Intel Core 2 Duo, 4 GB Ram Mac OS X 10.5.6 Motu Ultralite Firewire 1410 Berhinger ECM 8000 Monitoring: Tannoy Precision 8D, Yamaha Ns-10 Studio M I've already used REW with an old Tascam US122 but tha last week i sold it...

Hello, I should be getting everything in the mail today to finally start working on getting measurements in my room. I have an XP box and a presonus FP10 as well as the Dayton EMM-6. I tried using REW a few months back on a standard sound card and the calibration between the input and output...

I suggested elsewhere we start a thread to keep track on firewire cards / chipsets, and other hardware that can cause problems with DAW setups. So here it is :) Please post in here any info you find regarding firewire chipsets, motherboard chipsets, graphics cards etc, and compatibility issues...

Hi there, I'm trying to decide on a mic pre and like the FireWire Solo. It seems, (from search), there were/are issues getting it to work with REW. Most posts on subject were several months to a year old. Has anyone used this unit successfully with XP OS? I like the 24 bit and firewire...

As a regular user of Spectrafoo, Metric Halo's superb high resolution analysis program, I feel embarrassed to admit that its waterfall displays are far from adequate, so I began to seek out alternatives. Another Mac Program, Fuzz Measure, is a good possible alternative. But a friend pointed...

As a regular user of Spectrafoo, Metric Halo's superb high resolution analysis program, I feel embarrassed to admit that its waterfall displays are far from adequate, so I began to seek out alternatives. Another Mac Program, Fuzz Measure, is a good possible alternative. But a friend pointed...

Basically all I need is one xlr input for an at3035. The extra inputs on the maya 44 pci aren't necessary, but this interface is somewhat cheaper. Does anyone have any experience with either of these sound cards? I'm only going to be recording vocals. Mobility isn't an issue either. I'm just...

I can't get my soundcard calibrated, and I think that reason is that I can't select right input/output. Only options are "default", and with these I get error message "Impulse peak is not where it should be...", and the graph is not what is should be. My soundcard is Presonus Inspire 1394, I'm...

Hi... I have a phonic Helix 24 MKII, 24 channel mixer that is ALSO a firewire 16 simutaneous track recording soundcard. It shows up in REW fine and iIcan do measurements, but I do not understand how to calibrate it since it does not have line in outs that go to the computer, only firewire...