Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. REW Forum
    The graphs of Impulse Response data points in REW are always displayed with a fit curve. This curve is necessary to interpolate intermediate points between actual sampled data as in the option “Sub-Sample Timing Adjustment”. Although phase could be determined by the ratio of the Input/Output...
  2. Home Theater Design and Construction
    First real post, and building my first HT which I want to do properly so that I won't need to do it again. Thanks for all the hints picked up already! Its 7.2 x 4.4m, downstairs, below the main living area. Currently working on the ceiling installation. I intend to use two layers of 13mm...
  3. Home Theater Projectors
    Hi all, I'm doing some small tweeks to my HT right now. I've noticed that the image my projector sends to my screen isn't square. I can get the top right corner and bottom left corner perfectly in line with the screen, but the opposite corners are bleeding about an inch past the screen. I...
  4. Remotes | Cables | Accessories | Tweaks
    I'm going to use the SNAP N SEAL Compression fittings to make all my own RG6QS cables. I need to make 20 cables from 20ft to 100ft long. I'm looking for a product that works well, I have never used this product before, please give me some advice. I'm not sure I need RG6QS, I think RG6 will...
  5. DIY Subwoofers - General Discussion
    Hi there, Is it ok to fit FI Q18's into 25mm mdf using 30 hex bolts and T nuts. I forgot to double up on my inner panels for them. cheers Graham
1-5 of 5 Results
Top