Sorry if this seems lazy. I've read some posts but just get completely lost in all the information
So I've always fooled with A/V, but could only ever afford box package systems. Finally found myself able to afford some nice toys and built myself a home theatre. 120" projector screen. Hi def...
So finally finished one of my 18" Full Martys and been recording it in action to share with you guys. When I build the second one I will fully video log it for you all throughout the build and same with my theater room build as it happens.
But overall this thing is a beast! My wife thought I...
I have been experimenting with full range equalisation with REW for a few days, and I'd like to discuss the topic of Target curves for a stereo 2.0 system. Strangely enough, I wasn't satisfied at all with the proposed target curve in REW, and I ended with a somewhat different one.
I came to...
my name is Philipp and i came across this board searching for more information about REW and especially REW in cooperation with a miniDSP 2x4.
There a many tutorials out there, but most cover EQing a subwoofer or require familarity with acoustics.
In my case i like to linearize the sound of...
Hi all, I'm working on a plan to optimize my dedicated home theater space and am rethinking speaker selection.
Room is going to be about 13'W x 20'L. The plan was to use Statement speakers behind an AT screen (ported version, and they're half built). Problem is that these speakers really take a...
I am trying to calibrate my four way miniDSP OpenDRC-DA8 based speakers. My first step is to balance the four drivers in the miniDSP panel. What speaker response should I be aiming for? Flat response sounds horrible; I balanced the drivers using a 3db roll off per octave using the EQ panel of...
So this topic was brought up in another post and thought it would be a good discussion.
Can you damage a speaker running them full range if they really cant do full range say from 20Hz-20kHz
My understanding is that if you keep the input volume within its designed range and the crossovers are...
in the past I've always ran my 2ch fronts crossed over at around 80hz then use REW and my BFD to get a nice flat in room response. If I were to grab a preamp without the ability to cross over my mains and run them full range,, how difficult would it be to get a decent room response? Phase and...
OK so iv finally gotten REW to work on my Linux machine which is jack full time - by not using jack.
anyway i was doing initial tests to set levels using the test levels in preferences.
When you use the full range test it sounds nothing like pink noise being heavily mid.
I’m using Midas m32...
Can anyone tell me what sort of curve I should use as a transition from a bass hard knee to the remainder of the spectrum on a full range target curve? My current hard knee is shown below.
Thanks for the help!
would like to get some opinions on a home theater I am building for my father and mother. They just moved into this monstrosity of the house (they just retired) and instead of putting a bar in the basement...as they don't drink, I recommended a home theater, and so got a greenlight.
I have been unhappy with my center channel. I've been running kg5.5s as fronts kg 3.5s as surrounds a huge homemade sub that I documented on here and a kv 1 center. The kv 1just doesn't have enough for everything else. I'm thing of finding another kg 3.5 to use as a center. What do you think?
I know Harmony Remotes have a help button if something goes wrong.
But someone told be URC Remotes are Full Proof. This for a Condo with Renters.
So they are looking for a Full Proof Remote that does not make mistakes. I find that hard to believe right or am i wrong ?
I'm looking at replacing quite a bit of my system, as I have some budget to play with this year.
Generic Sony DVD/Bluray player (I also have available a newer Sony BDPS3200)
Sunfire CRM-2c center channel*
Generic Pioneer powered sub (100w, Best Buy purchase)*
I have been looking for a new main media closet receiver that can drive 7.1 speakers in my main listening area while simultaneously delivering left and right channels from the main area content to two ceiling mounted speakers in the kitchen area. This is all in a very open floor plan with the...
So I am new to this, bear with me. I am using REW to try to understand my room acoustics better and hope to make some compensations based on it using EqualizerAPO, but this is not my question.
I am getting a consistent 6db/octave uptrend (red line)thru the audible range. I am using the old...
Has anyone had any experience with 3" full range drivers or similar size? I have been considering a couple different aluminum full range drivers. What I would like to do is cross them over around 100 to 300Hz depending and use a 5.25" subwoofer to take on the low end down to about 38Hz. I...