Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 10 Results
  1. DIY Speakers
    Hi, been searching for a while for this... I am trying to put 3 different power handling drivers in one speaker, drivers rated 70w, 50W and 30W, going in woofer, mid, tweeter order, fed by a 100 W amp. Is this going to work, I imagine I have to reduce the power going to the tweeter at least but...
  2. DIY Audio
    Can someone please plug the JBL 2206 driver into their software and tell me what the max spl from this driver is in a fully active 4 way system from 80-1khz. Where does it run out of steam? I want the 2206 to cross over to a 2235 or 2245 on the low end and a TAD 4001 or JBL 2446 on the upper end...
  3. DIY Speakers
    Hi everyone, Trying to do a similar frequency distribution between drivers as in a full size cinema and have been toying with the idea of a 12" prosound driver for 80-500hz and use a mid size full range above. In a true cinema, above 12k is usually rolled of a little, sometimes deliberately but...
  4. DIY Speakers
    My center channel couldn't take the power :( I need a center channel that can handle at LEAST 200rms at 8 ohms.....Any advice? I have been searching all day with no luck! Do I have to build one on my own or do a few companies have one in their current line up?
  5. DIY Subwoofers - General Discussion
    Hi guys After seeing Ryan's thread on the Exodux forum asking what the real capable power handling of the mealstrom. It got me thinking about the Q18 driver. What is the REAL WORLD power handling on one of those. I have the BP power upgrade which quotes: So I am guessing but my two Q drivers...
  6. DIY Subwoofers - General Discussion
    Kevin, why is the power handling so high on these drivers? I know they are rated conservatively but can easily take 3000 watts when done so properly. I didn't want to go OT and hijack smoggysky'a thread.
  7. DIY Subwoofers - General Discussion
    I havent seen anyone powering 2 with an EP4000 in stereo 4 ohm. Kevin, what are your thoughts on that setup with the ever popular 7cf with (2) 18" PR setups? Assuming of course whatever the filter works out to down low? I am entertaining that option as well as a dual horns after buying the...
  8. Home Audio Speakers
    The other day I was thinking about my new onkyo 876. Now compare it to a onkyo 506. One has 140 watts of power, the other has 75. At Reference level what difference are we going to hear? Same goes for speakers, I looked at a high end polk, thats only rated 88db sensitivity, but with 300watts...
1-8 of 10 Results