Home Theater Forum and Systems banner
hardware
1-19 of 66 Results
  1. REW Forum
    Hi guys, I would appreciate if someone could chime in if equipment used to measure my studio monitors in my room would work? This is how my monitors are currently connected: Desktop PC via USB -> Behringer UMC204HD (that can do phantom power) -> 1/4" out to XLR -> Focal Alpha Studio Monitors I...
  2. System Setup and Connection
    I have a Yamaha Advantage RX-A 3050 that uses YPAO, not YPAO R.S.C. I will be setting up my Home Theater as an 11.4 configuration with all Klipsch speakers and subs. In researching your recommendations I can see how the miniDSP 2X4HD would be a good tool to set up the four subwoofers. From...
  3. Home Theater, Audio and Video News
    Nearly two years ago, Emotiva released its then-highly-anticipated XMC-1 7.2 Channel Preamp Processor. Following an elongated development cycle, it had the unfortunate fate of entering the market during a period of major technology shifts including the emergence of immersive sound and 4K video...
  4. Home Theater Receivers | Processors | Amps
    Is there any standalone multi-channel EQ hardware, possibly MiniDSP, that will work with an Atmos receiver?
  5. REW Forum
    Hi all I would like to design and build a 2 way system based on some speakers I have obtained with no available data. I have only commenced reading on the topic however I understand I will need to obtain impedance measurements of Thiele and Small parameters to design an enclosure, then measure...
  6. REW Forum
    Downloaded REW a while back, but only just got some time to delve in - good stuff. I've spent a fair bit of time mainly with the measurement side of REW yesterday & today and found it fascinating - especially the results of moving my monitors around to change the frequency response in room...
  7. SPL Meters | Mic's | Calibration | Sound Cards
    Hello All, I am in the process of setting up the hardware I need to EQ my room with REW. I have put together a list of Pre amps that are listed on my local classifieds. Please let me know which ones will work and what ones you would recommend. Thank you for your help 1. Behringer XENYX...
  8. Computers | HTPC | Media Servers
    Been wanting do set up a server to distribute 2 channel audio and video SD and possibly HD/BlueRay through the house I'm building. I just found and read wbasset's excellent write up about building an AV server...
  9. REW Forum
    I have reviewed the REW Cabling and Connections but still not answer some of my questions. Right now I am not ready to bring my audio equipment in my living room into the equation yet until I feel comfortable on how to use REW application. Here's what I have now and hope I can get decent...
  10. REW Forum
    Hi All, This is my VERY first post on here and im really looking forward to getting acquainted. I just took delivery and installed 13 new GIK Acoustic bass traps. (service from Glenn was top notch by the way!!!!! I would highly recommend. A 40 minute phone call and a week after I placed my...
  11. Video Game Systems | Video Games
    PS4 hardware loss will be recovered at launch via PS Plus subs & launch titles, Sony hopes PlayStation 4 is expected to make a loss at launch, Sony has confirmed, but the company hopes to regain some of the outgoings via the new paid PS Plus requirement for online gaming...
  12. REW Forum
    Installing a UMC-200 - heard EmoQ not so hot as far as auto Eq but has 11 band manual Eq avail - so - have as yet unused(for speaker build plans also yet to be done) the following equip - basically asking will this work for simply dialing in my 5.1 HT sound sys(will be 7.1)? The forum is...
  13. Video Game Systems | Video Games
    Bethesda’s Wii U absence is “largely a hardware thing”, says Hines Bethesda’s vice-president of PR & marketing Pete Hines has re–iterated the company’s stance that Wii U is not on its immediate radar. Speaking with Joystiq at QuakeCon, Hines said, “None of the games...
  14. REW Forum
    A respected contributor in an REW thread over on AVS Forums has advised me that the "Use Loopback as Timing Reference" must be configured in the Impulse Response Calculation section of the Analysis Preferences tab. Furthermore, the "Set t=0 at IR Peak" must be unchecked. Without these...
  15. REW Forum
    Hi all! I was wondering if there's a list of hardware EQ's that appear in the REW app. Make, Model etc... Im not familiar with those EQ's it has listed, so thought you guys might steer me in a direction. thanks much!! brad
  16. REW Forum
    Hi all, Newbie questions for getting started with REW. I wanted to get your opinions on the following questions. 1. Is the mniDSP OpenDRC-AN the right choice for setting up a stereo pair of analog subs? 2. Can the filter settings be applied from OmniMic V2 as well? 3. Is a SPDIF output in...
  17. Home Theater Systems | Equipment
    Sonicmojo's Equipment List A quick look at what will form the heart of the new 2013 HT build starting in late Feb 2013 The "Rack" Pioneer Elite VSX-23THX AVR Creek EVO 5350 2 Channel Integrated Amp Oppo BDP-83 Pace 758D HD TV Reciever (with PVR) Technics 1210M5G Direct Drive Turntable Musical...
  18. REW Forum
    Sorry guys if this is a dim question but I've spent several hours reading the introductory material and am still unsure... I want to use REW to try to optimise my 5m by 7m newly constructed listening room. I'm only 2 channel, using Kingsound King electrostatic speakers. I will be running REW...
  19. Audio Processing
    I have just purchased a Behringer DEQ2496 expecting to do all the equalizing externally. I am now debating if it is just more simple to use the DSP capability in JRiver for all equalizing, especially when you can be more accurate with the filter setting in JRiver compared to the 2496. With...
1-19 of 66 Results
Top