Home Theater Forum and Systems banner

hdmi

  1. Home Theater Receivers | Processors | Amps
    I got the unit updated to v1.31 from 1.26 & it worked for about a week or 2 but now it’s back to the same thing cutting out video & audio on HDMI inputs & sometimes back from TV smart apps. Tried to update firmware again but it just freezes at the update screen & doesn’t go out to get a new...
  2. REW Forum
    I have always used REW with a calibrated ECM8000 mic and a Steinberg UR22MkII sending the output from the UR22 to the analog input on my AVR for the speaker being measured. That setup used Input 1 and Output 1 as loopback. Input 2 connected to the mic and output 2 connected to the analog AVR...
  3. Blu-ray | DVD | Disc Media Players
    What is the best way to run the audio out from a Blu-ray player? My Panasonic has 7.1 analog out, plus audio only HDMI out, digital coaxial, and optical. Using the analog out now as my player (DMP-UB900) has better processing than my Integra pre-amp processor. Is this the best way to get the...
  4. REW Forum
    Something I came across recently that have me concerned, not knowing what's causing it. I recently finished building a pair of speakers, and the first set of measurements I took I was using my preamp and power amp so I had to use the headphone jack on a windows 10 laptop. The FR graph has a...
  5. REW Forum
    Hey guys, it's been a while since I have been here. I just upgraded my subs to dual SVS SB16 Ultras. They sound great already but wanted to see if their onboard EQ can tweak the last bit of sound for me. My Microsoft Surface laptop doesn't have an HDMI out, but uses a display port out, which...
  6. Home Theater Receivers | Processors | Amps
    First of all, I am a newbie in AVS. I know very little about amp selection. The HT-E5550WK Samsung Bluray disc player of my theater system has stopped working. Since I don't watch movies from disc anymore (I watch from a TV box nowadays), I would prefer to get a new amps with HDMI in/output...
  7. Audio Processing
    I currently have a HTPC connected to my AVR via HDMI and also a two channel analog cable. I need the two channel analog cable because my AVR will only use audio sources for the second zone. I have the HTPC OS (Win 10) setup to output to both the analog audio and the HDMI. However when Microsoft...
  8. DIY Audio
    I'm looking for an HDMI ARC Surround Sound decoder that will do the following: 1. Provide 5.1 RCA unbalanced analog outputs so I can feed powered speakers (I have a bunch of Event BAS 20/20 speakers to use for the LCR and surrounds. I'll look for a suitable powered sub.) 2. Provide analog...
  9. Audio Processing
    i just resently tried the J-Tech Digital 4K 60HZ HDMI Audio Extractor Converter SPDIF + 3.5MM Output supports HDMI 2.0, 18Gpbs Bandwidth, HDCP 2.2, Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision, HDR10 and i had to return this because it didnt accept my vizio m55e0 with the full uhd...
  10. Audio Processing
    i have an issue iv been trying to find a 4K at 60hz with 7.1 HDMI Audio Extractor that can pull dts 5.1,dolby 5.1,lpcm 2 an 5.1 7.1 audio while allowing 4k at 60hz with yuv 4.2.2 12bit rec2020 from nvidia sheild an connected to a VIZIO SmartCast™ M-Series™ 55" Class Ultra HD HDR XLED...
  11. Home Theater System Recommendations
    hi out of these 2 5in1 hdmi splitters what would be the better overall switcher to use E-SDS UHD [email protected] HDMI Switch ,5x1 HDMI Switch vs xolorspace smartooo 23051 @60hz need it for the best audio and resolution for 65e6v oled tv with sky q box virginmedia v6 box buzzbox xls 3000 android box...
  12. Home Theater System Recommendations
    hi i am after buying a 5 in1out hdmi splitter with the very latest specs ★4K ULTRA HD 5 IN1 OUT: This HDMI Switch connects up to 5 UHD HDMI sources on a single display and easily switchs between 5 sources. Support bandwidth 18Gps/600MHZ, HDCP 2.2, 4K 60HZ 4:4:4, FullHD, UHD, CEC, DeepColor...
  13. Home Theater Receivers | Processors | Amps
    Hi guys, new here and hoping someone can advice me. I have a Pioneer VSX-524 receiver. I had a Samsung JU6600 TV but changed that to a Hisense M7000UWG TV. I will connect and HDMI from the TV HDMI 2 (arc) to the Pioneer HDMI out (arc) and then I enable the cec, power off etc settings on the TV...
  14. System Setup and Connection
    Well my pre-amp is pre-HDMI and I can't justify upgrading it. I'm looking to use a simple Apple TV or Raspberry Pi-3 as a media stream device replacing my bulky HTPC. Unfortunately digital audio is only out over HDMI. So I'm looking for recommendations on a 4x1 or 4x2 HDMI switch with optical...
  15. AV Home Theater
    It's been awhile since I've been around here but I found some news that y'all might be interested in ... New HDMI 2.1 spec includes support for Dynamic HDR, 8K resolution, and more...
  16. System Setup and Connection
    Hi, I'm on my 3rd receiver, 2nd blu ray player and maybe a new tv soon trying to solve this. I feel my Vizio e50-d1 might be the problem now. I've hooked BD players up directly to the tv with no problems. I've had just the receiver connected to the tv with no problems. The problem always comes...
  17. REW Forum
    If this issue has been raised before, I couldn't find it. Please point me in the right direction if it has. My bottom-line question: "Is it possible to use REW in ASIO/HDMI mode with a preamp/mic instead of a USB mic? I'm now able to send test signals to each speaker without switching cables...
  18. REW Forum
    It is not so long I am using REW. I am doing some sub testing and trying to send patterns to LFE channel only. I have an Anthem MRX510 and an OLED 55B6V LG TV I have loaded last version of asio4all driver and connecting to my Anthem MRX I can select one of the 8 channel. Unluckily I have a...
  19. Remotes | Cables | Accessories | Tweaks
    Every HDMI switch I have seen for sale has one or more "automatic" features whereby it will switch inputs on some condition. I don't want that. I want a switch with a minimum of three inputs that stays set to the input I choose on the remote, no matter what other inputs get plugged in, pulled...
  20. REW Forum
    After years of using an Oppo BluRay player as a preamp/processor, I now am using a Nuforce AVP-18 processor that only accepts HDMI inputs, which is fine as all of my sources are digital. I have read that REW now will allow signals to be generated through a HDMI cable and I am anxious to use REW...
Top