Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-26 of 26 Results
  1. Samsung
    I would first off like to thank the many contributors to this forum, especially Icallio, for the comprehensive knowledge you have shared with the masses concerning this particular model. I currently own the AX/XAA model, and have attempted my own revision of the pressure trick by soldering a...
  2. Samsung
    I have a friend who has had a noiseless no start on her DLP. I changed the bulb then the ballast. the ballast is getting the 300+ volts, but no lamp light. I am afraid it might be the power board. I checked all the fuses and made sure the connections were tight, then I did a MM test on all...
  3. Samsung
    a helpful person recommended that i start a new thread on this topic. i have seen many similar threads but no conclusion as to the problem source or solution. i have a four year old hlr5067wax/xaa. about a week ago the set began to show the following symptoms: reduced frame rate...
  4. Samsung
    New User- I have a Samsung hlr5067w that is displaying green squares on the screen while using the HDTV tuner, does not display green squares when using my XBox 360 through the composite inputs. Can anyone tell me define the problem? DMD board or Digital board? I have read many of the posts...
  5. Samsung
    My Samsung DLP HLR5067W started experiencing the "green plaid" problem last week. Found thread http://www.hometheatershack.com/forums/samsung/20791-hlr6167wax-xaa-digital-board-problems.html and thought (hoped) this simple fix was the answer. (by the way, the special nut is called a "t-nut".)...
  6. Samsung
    when you take the cover off the digital board you see a chip close to the dvi output on the board. with my tv I put a ball of foil on there making sure it doesn't short out against anything eles. it has to be big enough so when you push the case back on it cashes down iand t sqeezes the chip...
21-26 of 26 Results
Top