Home Theater Forum and Systems banner
imaging
1-10 of 10 Results
  1. Two Channel Audio
    I am using my HT to temporaily test a 2 channel listening room setup. The result in ok but want to improve imaging & sound stage I get good center fill but speakers are still localized as I can hear audio from both speakers. How do I fix this? My setup is as follows: speakers are Golden...
  2. Home Audio Acoustics
    Hi all, I have done quite a bit of work on ensuring that all drivers are time aligned correctly for the listening position. Phase/polarity looks good too. Measurements seem to be correct and are easily verifiable in REW/HolmImpulse. With that said, I have an odd issue due to the shape of my...
  3. REW Forum
    Hello everybody Recently I tried the demo of Dirac live and got really good results. The Dirac filter didn't affect the overall sound of the speakers, but the imaging improved quite a bit. The stage was more clearly defined, and instruments better separated. So I thought I'd try and see whether...
  4. Audio Processing
    Is it as important to setup a pair of speakers for soundstage imaging when you are using Audyssey? I am tending to think the differences in speakers is not as great when they are run through the processor vs no processing at all. Which brings up another issue... Does it make auditioning a pair...
  5. CD-BD-DVD Music | Vinyl Records
    What some songs that you really like for demoing... particularly with good imaging and soundstage? Not only songs that just plain sound good, but some that might challenge the speakers... good deep male voice tracks, good female voice tracks, good jazz tracks, good big bass tracks, tracks with...
  6. Two Channel Audio
    In another thread recently there was some discussion about imaging and the definition of good imaging. I had always assumed there was only one way of looking at it, but of course, as with most things, that is not true. So now I am really curious to hear how others define good imaging. What is...
  7. REW Forum
    Hi as the title says. I have a Antimode Dual Core 2.0 that has Auto EQ as well as manual EQ. It also has 4 profiles/presets. I have 2 x free profiles that i can use for experimental purposes. 1. Is there frequencies or something else that effect imaging? 2. Also is there frequencies or...
  8. Home Audio Acoustics
    Over the last year that I have had my 5.1 system set up, I have become more and more aware that I am not getting the most our of my setup as far as soundstage and imaging go. On a lot of material, everything seems squished into the center of the room. One reason I know that I can get more out...
  9. DIY Speakers
    I am wondering if the tweeter should be placed above or can it be placed beside a upper mid/low high driver? both are horns and the crossover frequency will be around 12.25khz. The only reason I am considering putting it beside is to reduce my total cabinet height, but if will have a negative...
  10. Two Channel Audio
    Hi, I use two channel audio when listening to my current DIY speakers, but they're not setup ideally right now. They're currently about 12ft apart from each other, but I sit much closer to one than the other. Once I get around to constructing proper stands for them and move them closer...
1-10 of 10 Results
Top