Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 267 Results
  1. Pioneer
    My Pioneer receiver has been working for the last year. Suddenly the TV input is displaying C1 or 01 instead of H. I reset the receiver and the Samsung smart TV. I made sure that the optic audio cable was properly installed on TV and receiver, and that it wasn't bumped out. There is no "signal...
  2. System Setup and Connection
    I have a Samsung TV going into a Cambridge receiver. The receiver remote won't change source/input, which is just a tad bit tedious getting up to change that on the box. I've found a workaround by routing most of my components (DVD, Firestick, etc) through the TV and using the TV remote but I...
  3. REW Forum
    Hello, all. I haven't messed around with REW in about a year, but I was trying to set it up yesterday again to take some measurements and dial in my 2 new subs. Each time I try to calibrate it, it keeps giving me an error that the audio level is too low, (-129dB). When I tap on the mic on...
  4. REW Forum
    I have been using REW for some time now but since the recent Windows creators update I cannot get it to see the microphone input. It sees the sound card and it is the same settings as previously but nothing comes through! The sound card still works with other software ok. I bought a separate USB...
  5. Home Audio Subwoofers
    Folks, Greetings... Its been a while since I posted...and feels good to be back... I'm based in Bangalore, India and have 5 channels of Neumann KH310 (3 way active, with total 290W in each channel) with MOTU Ultralite MK3 as my "Sound Card". Source is a PC playing FLAC files from a hard-drive...
  6. DIY Subwoofers - General Discussion
    Hey All - I am looking for some help in selecting and designing my subwoofer build. Hoping someone knowledgable here can give me a hand. Our basement has a wall of built-ins so traditional systems are a no-go for me. Instead I'm going to be doing some heavy modifications to the existing...
  7. REW Forum
    hi all!! im using REW 101 HTS step by step pdf i get to step 3a page 39 & have the following problem UMIK-1 does not show up in the input box...... what i get is..Conexant HD Audio capture 1 ..and............Conexant HD Audio capture 2 however if i go back & select java as the driver, umik-1...
  8. REW Forum
    I noticed "Check Levels" are not working under "Measure", so i'm checking levels at "Preferences"... I always try to keep imput at -19dB, and always worked, but now i'm beeing forced to keep it under -21dB, otherwise it gonna clip when measuring... Is there any kind of option where i can tame...
  9. REW Forum
    Hi all, I just started with REW a week or so ago, and I've picked up a lot of useful information from this forum and I want to thank you all for that. I was able to get measurements pretty much straight away. But now a week later, I want to take some more measurements, and I have no input on...
  10. REW Forum
    It's been a year since I have usesd REW so maybe some things have changed but I set Preferences and I THINK I set them the old way but when I Check Levels I get the hissing sound and movement on the Output but am not getting anything on the Left or Right input. Here is what my preferences look...
  11. REW Forum
    First time trying to run REW. Sorry if this is a dumb question but my time is limited and I have spent countless hours trying to figure this out with no luck. After calibrating my sound card I am having problems getting 75db without either adjusting the input gain on my focusrite 2i2 or using...
  12. System Setup and Connection
    Going with a 75" Samsung LED, 1080p. The 63 fit perfectly and going with a bigger screen I am going to have to have a mount that will allow me to move it out to access the attic door. The shelf you see was built to house amplifiers and to provide a resting spot for the TV, as I had the Samsung...
  13. REW Forum
    Hi John, After having struggled to find an affordable but really linear balanced XLR to USB adapter, I just thought it would be cool just to avoid it completely. Why not put the balanced signals directly (over 2 capacitors) to the stereo mic inputs and select L-R as an input? We just miss the...
  14. REW Forum
    Hi guys been away from this hobby for awhile, back it now and finally got REW setup with RS spl meter and bought a Behringer UCA222 to use with it. Did the calibrations etc and sweep, just wanted to ask if this is looking correct or?? Just seemed pretty simple figure I must be missing something...
  15. Home Theater System Recommendations
    I have a Sony STRDE475 receiver and I want to add surround speakers in my basement. I already have the walls wired for 2 front, 2 rear and the sub would be next to the couch either left or right in one of the rear corners. The room is about 18W X 16D X 8.5H. I always thought I would have to...
  16. REW Forum
    Does REW support 2 channel (stereo) input? I have a pair of matched mics in an ORTF arrangement and would like to measure in stereo. As far as I can see only L or R can be selected as input channel. Additionally, thanks for providing this software. I have spent the last few days comparing...
  17. REW Forum
    Hi all! I am having trouble making REW choose my Behringer measurement mic in the input section. It seems right (se picture), and I can also get measurements done, but it seems like REW is really using my built-in laptop mic to take measurements. If I for instance try the spell meter and tap my...
  18. REW Forum
    Using 5.12. Every once in a while when I go to do a Measure it shows 0 dB in red right from the start and the Input meter is not filling up at all and an alert pops up a few minute later from REW saying that no input was available from the soundcard. I am using ASIO4all and HDMI. I clear the...
  19. REW Forum
    During a sine sweep measurement the headroom readout sometimes turns red. Later found out that means input clipping, so any such measurement results are bad. But what I don't understand is how can that happen if the Check Levels and the Calibrate SPL were properly performed. Does it mean I...
  20. REW Forum
    Hello, When I use the Java driver, REW clearly sees the incoming signal from my microphone and I can make measurements. But as soon as I switch to ASIO, then there is no signal. On a choice there are only two "incoming devices: HD1 and HD2.While in device Manager, the microphone works, it not...
1-20 of 267 Results
Top