Home Theater Forum and Systems banner

integrating

  1. Audio Processing
    Hi all. I am trying to set up a Roku Ultra in my system. Presently, the Audio is a very nice 2 channel system that I do not want to compromise. I just purchased a Roku Ultra, and it seems pretty cool. I use a projector that is fed by HDMI. I also have an Oppo BDP-83 that I want...
  2. Two Channel Audio
    I’ve begun reading up on high rez music formats and decided to give it a try. So, I convinced my son to download the trial copy of JRiver Media Center and HDTracks downloader. We bought and downloaded a 96/24 FLAC copy of Ryan Adams Live at Carnegie last night. Tonight I’ll try to figure out...
  3. REW Forum
    I'm running into some issues when I activate Dynamic EQ on my Onkyo NR808 while using the BFD1124. This is what I've done thus far: Used the BFD to get a flat sub response with Audyssey and Dynamic EQ disabled Then ran Audyssey auto calibration with the BFD filters already in place Remeasured...
  4. SPL Meters | Mic's | Calibration | Sound Cards
    The trouble is that when i set my reference level to 75 db using the pink noise, then when i use say an 80 hz tone or lower to set the subs level then i cant get the 75 db level without turning the sub completely off because of the bass thats coming from the front speakers, anything added by the...
  5. DIY Subwoofers - General Discussion
    Hey guys, I've just purchased my first sub (well not exactly first, but I haven't had one in more than 10 years), and I'm in the process of integrating it into my 2 channel system (which also serves as HT system). I'm hoping that you can help me get things properly set up. My system...
  6. System Setup and Connection
    Wondering if I can get around having to open up drywall to run cabling.... I want to be able to stream HD content from a NAS to my AVR. It seems to me, the biggest bandwidth requirement would be between the receiver and the NAS and if I was prepared to take a little more time uploading...
  7. Electronic Processing/Equalization Devices
    I have a pair of Mackie HR-824 active monitors and although they have very good response (39Hz - 20kHz +/- 1.5dB), I would like to add a sub to reach down deeper. I'm thinking about adding a Rythmik F12 or F12G, but my source device (M-Audio FW410 recording interface) does not have any bass...
  8. Home Theater Receivers | Processors | Amps
    Just bought a rca soundbar and can't figure out a way to connect it to my receiver so i can hear both the soundbar and my other speakers. Any suggestions?
  9. REW Forum
    Hi Everyone.....I am completely new to calibrating sub with REW; but I've had 2 years experience with manual and PAINFUL calibration using RS Analog SPL meter and test tones. Thanx to all on this great forum; I decided to go the REW way. I've been reading a lot and used REW 5.0 for the very...
  10. REW Forum
    Currently I am using REW with FBD to EQ the single SVS Sub in my HT system. I have recently added an External Power Amp ( no problem here) and will soon add a preamp with HT bypass for two channel listening. My question is how to handle the subwoofer connections for 2 channel use. The...
  11. AV Home Theater
    I'm not sure where this thread best fits. I'm currently researching options for my HT. I have a Blu-ray as the only source but I'm considering my options for TV recording/viewing, as well as music storage and playback. It seems there are so many options and I'd like some suggestions on the...
  12. DIY Subwoofers - General Discussion
    Here is a photo of the cabinet I have to work with. I plan on removing the cabinet doors to accomodate two sealed 5cf subs, each housing a single IXL 18.4, front firing. Never mind the text on the photos. I have decided not to do an IB install with these subs as I don't think two 18's IB is...
  13. Home Audio Acoustics
    Hey all, I would like to hear a few opinions on what action should be taken in regards to optimizing my room's overall frequency response curve. I have installed REW on my old laptop and I am waiting on my order for a RS meter and a BFD 1124. My confusion is centered around whether I should...
  14. REW Forum
    I need help figuring out how to best integrate my mains. Here is what I have so far: Sub is an SVS PB12-Plus/2 with ports set at 20Hz I also have a house curve set: 20Hz +5.0 80Hz 0.0 This is what it looked like before I started (sub only): Here is the first crack with the BFD filters...
  15. DIY Subwoofers - General Discussion
    All this IB DIY stuff has got me wanting to dive into it... and I think I may over the next few months. This is not in any way indicating that my PB12-Plus/2's are not making me happy, they are incredible to say the least. This more just me loving to tinker with subs and being able to say...
Top