I am a noobie here so the answer may be obvious. I am interested in building a couple of subs using the new SI DS4-18.
On their web sites a couple of their specs are:
Mms 561 g
However if I input the Mms and Cms into WinISD the Fs is calculated as 18.76
Which should I...
This is a continuation of my modest build that you can read about over here.
I chose these drivers because of their compact size requirements, expected impact and relative cost. I have an odd shaped room and wanted more output to work with than not enough, so I bought two.
So here's the...
I currently have two mfw-15 turbo'd subs in a small room (not sure on square footage of room, but not big), they are co-located at opposite ends of the room, I have them tuned in well and calibrated and they do sound very good. But here's the thing, I am trying to reach about 12hz usable output...
Just investigating the possibility of using a freight forwarder to get a SI HT18.
Does anyone know the shipping height or weight?
More importantly would be the box size, as I can guess the weight based on the driver weight.
Ill be short...
1. What I have:
Receiver: Sony DA2400ES
Sub amp: Behringer NU1000DPS
Speakers: 4x B&W 601 S2 as satelites, central to come later...
2. What I need to figure out:
Location for sub (I'll use just one sub, maybe much later I will add more, so i have to place it wisely)...
This build thread is long past due. I’ve been promising myself and others for nearly a year now that I would finally do it and, for once, life seems to have given me the time to sit down and finally get it done or, rather, to get something, anything posted in time for this year’s MS...
Just to inform everyone here that the HST 18" from SI is coming back. Should be good in small cabinets and will cost about 589 dollars each. And now there will also be an 11" , 12" and 15" brothers to the 18". :D
Parameters for the 11" posted below from SI's FB page:
HST 11" T/S...
I just got this huge driver today and look forward to receiving, the almost, 15cuft box 40"wide, 30"tall , 20"deep from caraudiofactory in a few days.
I will be powering it with an Inuke 3000 in bridged mode. I also have a Velodyne 18" DD Servo that I have had before, and plan to see how it...
Per the title...
I have four Stereo Integrity HT 18 D4 for IB install via two manifolds. How much RMS power can each driver "safely" handle (using both voice coils)? Estimates are okay!
OR... What is an acceptable rule-of-thumb regarding "rated specs" (which are probably assuming enclosed) vs...
High excursion driver discussion- Sundwon Audio ZV4- Stereo Integrity (vaporware) - FI SP4 HT...
Anyone with first hand experience with one or the other, or both?
I'd like to hear all opinions on the FI sp4 vs the zv4.
3750 Peavey watts per sub
I am searching for an alternatve driver instead of the si15 to go with some electrostatic speakers.
Box is already build, sealed 3cu, plate amp is already bought, it is a dayton 540w at 4ohm.
Seems that google checkout has retired and stereo integrity has no other payment options for customers...
I would like to build a new cabinet based on my MFW15 clone for my new SI15 that I won from here. I am not too smart on WIN ISD so I would love some help. I would just like to tweak the dimensions and plans I have for the MFW clone. I have built 2 already. Unless someone thinks another...
In the spirit of "more is better" and "too much is not enough" I built a tapped horn out of a Stereo Integrity HT15D2.
And capable of a ton of clean output.
It took just under three sheets of plywood to build. All joints are screwed and glued with a glue cleat on every...
I have had a Maelstrom 18" in a Sonosub that was ported and the driver died for
1 year ago and have not have any subwoofer after that.
Now have the drive came after a new build.
My price limit on the driver are 200 USD/each and this are what a find.
This time i want to build a pair of...
Stereo Integrity HT Driver Giveaway - Qualification Thread
HTS and SI are teaming up to give away 3 (three) HT drivers to 3 (three) lucky members at HTS (1 driver per winner). Winner's choice of a 15" or 18" driver.
Qualification period is from May 20, 2013 through August...