Home Theater Forum and Systems banner

intermittent

  1. General Service and Technical Information
    I can turn on system and select zone 2 but nothing happens. Sometimes, can unplug Yamaha and plug back in and Zone 2 works and will work for as long as system is on. Then, when system shut down, MAYBE zone 2 will work but most often not. Then I unplug Yamaha for a few minutes and it may come...
  2. System Setup and Connection
    Hi there ... thanks in advance for considering my A/V woes. My setup is: Vizio M65-C1 Vizio SB4051-C0 Dish Hopper AppleTV iMounTop™ 3x1 High Speed HDMI Switcher 90% of the time this setup works nicely. However, I experience intermittent dropouts where the system goes black, does some sort of a...
  3. Home Theater Receivers | Processors | Amps
    I just received the 3010 today from accessories4less.com. Refurbished, 1 year warranty. I'm having intermittent static in the Right Front channel. All other active channels (L, C, Surround L+R, Surround Back L+R) sound clean. The static is clearly audible, and is usually at least as loud as...
  4. Home Audio Subwoofers
    I recently purchased a Cadence CSX12 subwoofer and am experiencing a intermittent static/crackling noise. It will happen even when the RCA cable is unplugged and is a constant volume no matter what the sub is set at. Sometimes sound won't come through the sub then suddenly on another song/movie...
  5. REW Forum
    I hope I can describe this issue effectively. I have been using REQ for quite some time, so I am reasonably familiar with its basic functions. My REQ kit includes a Soundblaster X-Fi USB soundcard, an EMM-6 calibrated mic (with custom calibration files provided by Spectrum Labs), a Xenyx 502...
  6. Mitsubishi
    So I never had a response to this, and now am at the point where that 'future problem' may be showing up.. Right now, the TV will *sometimes* fire up with the convergence way out of whack. Red seems to have a non-linear keystone stretch to the right, and blue the same but to the left...
  7. Home Theater Receivers | Processors | Amps
    Just got the denon AVR-1312 all works well (cable, apple tv etc) when connected apart from my blu ray player. Its a LG. Im getting no picture and intermittent sound. when connected directly to the tv it works fine but putting it through the theater system creates the problem. any ideas??
  8. Mitsubishi
    I'm getting this Intermittent hazy appearance that makes the picture look washed out. The colors are still present but it looks really washed out (or appears too bright), and this comes and goes. At times a minor tap on the TV will make this happen or go away. A service guy came out and...
  9. System Setup and Connection
    I have a major problem with my home theater system. I have a Denon HD receiver with HD Cable box and Apple TV connected. Intermittently and very unpredictably, when I am watching something (could be a tv show, on demand movie, or apple tv movie), the screen goes blank and then goes back to the...
  10. Samsung
    Hi All, I have a Samsung DLP 50" connected to Comcast Cable. The set is about a year and a half old. I have replaced the lamp about 6-8 months ago and last month replaced the color wheel which shattered into pieces. My latest problem is that, intermittenly, the screen goes completely blue...
  11. SVSound
    A strange problem and not sure why this is. Last night when I was setting up my new PB13 Ultra I was sending my receiver some test tones. The 20hz and the 30hz test tones both cut in and out about once very 3 seconds, the rest above 40hz were fine. The display on my Onkyo did not change so it...
  12. Electronic Processing/Equalization Devices
    Has anyone experienced an intermittent pop sound in their sub when using the BFD? I'm NOT referencing the thump caused by turning the BFD on or off. Occasionally with no seamingly pattern or reason I'll get a POP sound from my sub ever since adding the BFD. Like maybe one pop per hour or...
Top