Home Theater Forum and Systems banner

interpret

  1. Help me interpret my room measurements?

    REW Forum
    UPDATE: Link to my REW file: http://www.totomedia.com/theatre-measurements.zip Hi folks, REW noob here -- I have a UMIK-1 and the other day took the measurements posted below. I used the HDMI method via my macbook and followed the guides as best I could. I'm starting to read up on...
  2. Tried calibrating a Sharp LE820, can someone help interpret the results? (and maybe improve it)

    Video Calibration
    So today I calibrated my TV Sharp 40LE820 (at least tried) , but still new to using a i1display pro and HCFR (+i1profiler which I didn't use this time). Gamma I know is not perfect, but it is as close as I could get it, well everything is as close as i could get it. But, the RGB levels are...
  3. New to REQ - help me interpret the results

    REW Forum
    Hello everyone, I have a mini project studio in my house which I work out of. I know my room isn't perfect but know it well and am able to get mixes that translate well enough for me. However I'm always up for learning something new so have decided to have a go at the scary world of Room...
  4. My first measurements and how to interpret them

    REW Forum
    Hi, I just did my first measurements and I need a little help from you guys to interpret them. My first question would be, how bad is it ? :sweat: The first screenshot is my soundcard calibration and then I did 4 measurements. I kind of worry a lot about the 1 KHz to 20 KHz range. Seems to be...
  5. Interpret this spectrogram please

    REW Forum
    Hey everyone. Here is a spectrogram of my subs. I am just not entirely sure how to read it as far as what is good, what is bad, and what it is really telling me. Any expert tips?
  6. Help to interpret results

    Home Audio Acoustics
    Hey folks, I have gone the route to set up a ECM8000 mic into a X502 and UCA222 into a Win Vista PC. I am able to make measurements and visually see the impact of speaker location changes (although the various controls on the X502 are somewhat of a mystery to me, I got it working). After...
  7. Help to interpret graphs

    REW Forum
    Please, I need help to interpret graphs of my recording rooms. I did the steps as directed by REW. There are two rooms. I wonder, in general, what are the precautions that must be taken into rooms from these measurements. I greatly appreciate any help.
  8. How to interpret SPL specifications?

    Pro Audio
    After noticing the high spl claims on many pro components (versus home audio where nothing is said) I'm getting curious and thought I'd better ask the ones that might know. So, what conclusions is it possible to draw from the following spec's? Genelec about their 1038B Max short term sin wave...
  9. Now what ! How to interpret for my room

    REW Forum
    Hello: Ok a newby here. I did my basic REW room measurement - for a small home recording studio. The graphs have been generated - Now I need some help to interpret the results. The general "Help" section is very wordy with theory and technical stuff. I am not finding it very user friendly in...
  10. my first measurement, how to interpret

    Home Audio Acoustics
    Dear all, I have performed my first measurements yesterday and I must say, I felt kind of stupid yesterday evening. I notice strange things when measuring, but are not sure if this is in fact strange. I am working on a home studio. My setup: Computer -> Adam A7X I have the ECM8000 hanging...
  11. Someone Help me interpret this?

    REW Forum
    Hello, First of all am I posting in the righ place??? I have just got the subwoofer YST-215 paired with Yamaha NS10m I have just put the woofer in between the sweet spot and done a sweep from 15-400 Hz The sub in in Phase reverse mode. I have acoustic treatment in the room (Side walls...
  12. First Measurement, Not Sure How to Interpret the Results Yet

    REW Forum
    Hi all! This is my first run using a Radio Shack SPL meter and laptop soundcard. I have 2 subs in up front corners which I calibrated and up'd the AVR gain to be a little hot. Am I setup correctly? Am I capturing accurate data? Any comments? --Jim
  13. How to interpret phase in REW?

    REW Forum
    Below is the REW graph for my subs. I'm interested in knowing how to read the phase graph in particular, especially what do those few vertical lines mean? Can anyone shed some light on this?
  14. Two days, 12+ Hours, How do I interpret this...?

    REW Forum
    I've spent a TON of time researching and sub crawling, and repositioning subs, and calibrating sound levels, and and and... So I've been able to calibrate it at 75db and did two runs (Among the hundreds previously.) My last two runs and sub positions seem to give me the closes resemblance to a...
  15. Plse Help Interpret First REW Meas

    REW Forum
    First, this is a great forum and a great tool. I've just completed my first measurements as shown below and could really use some of the expert advice out there on interpreting these results - and as importantly - what to do next. I've also attached a room drawing with enough detail to give...
  16. Interpret results?

    REW Forum
    Hi, I have som problems interpreting the result of my measurement...I used a ECM8000 mic and used the calibration from the site! How do I interpret this??
  17. Can Someone Help Me Interpret My Graph?

    REW Forum
    I think I managed to get an actual reading from my SPL...finally! I ended up using my cheap on-board soundcard (SoundMax). Anyway, can someone help me interpret the resulting graph? From what I can guess, this is telling me that at my listening position, sound up to 180 Hz is not...
  18. Can Someone Help Me Interpret My Graph?

    REW Forum
    I think I managed to get an actual reading from my SPL...finally! I ended up using my cheap on-board soundcard (SoundMax). Anyway, can someone help me interpret the resulting graph? From what I can guess, this is telling me that at my listening position, sound up to 180 Hz is not...
  19. help me interpret this graph

    REW Forum
    Hi, I'm a complete newb and don't understand nothing about the measurement I did, so could someone tell me how bad is my graph? I used a digital splmeter (ar824) using C weighing, fast and level at 60, xo on sub at 80. Unplugged both speakers leaving only the sub (ACI Titan). Any help...
Top