Home Theater Forum and Systems banner
inuke
41-60 of 60 Results
  1. Subwoofer Amps | High Pass Filters
    Hi I am looking for suggestions on replacement fans for the Inuke 6000DSP. This is what I have found so far but am a little unsure if the CFM is ok or too low. http://www.overclockers.co.uk/showproduct.php?prodid=FG-022-BQ&groupid=701&catid=2331&subcat=819 Dimensions: 80 x 80 x 25 mm...
  2. Home Theater Receivers | Processors | Amps
    Hi all, I've been doing some research on which amp to get for a pair of Noesis 212HTs that are supposed to arrive in about a month. I need a high pass crossover around 60-80 Hz for the Noesis, and an iNuke with DSP seems like the most cost effective solution there is. I was also thinking about...
  3. REW Forum
    This has been mentioned inside another thread but I thought I'd pull it out as a separate feature request to give it slightly more visibility (as there were no further replies in that thread). The inuke amps provide a PEQ facility and they provide an app you can use to dial it in from a...
  4. Home Theater Receivers | Processors | Amps
    Hey guys, Out of curiousity today I compared the frquency response of my Onkyo TX-NR1007, a INuke DSP 3000, and a Crown XLS-202. It appears the INuke DSP 3000 has a bit of a treble increase over the other two at the highest end of the audible spectrum, but nothing too outlandish. I used an...
  5. Classifieds - Audio Equipment
    Amp is in new condition and is less than 5 months old. Please send me a pm if interested.
  6. DIY Subwoofers - General Discussion
    Hi guy's, I recently received my new amp and happy to finally be able to use one. To start, just one channel is used on a DIY sub, for experimentation. I read that there was no equalizing or HPF under 20hz. There supposed to be a workaround but I didn't find the actual method. My Google-fu has...
  7. Subwoofer Amps | High Pass Filters
    I am replacing my Infinity IL120s plate amp with a Behringer iNuke NU1000DSP amp. I've ordered the cables I need from monoprice, but not sure how to hookup everything. My Onkyo avs has 1 sub pre-amp output. Do I run my rca to xls cable to channel A or B on the inuke1000? I will add a 4...
  8. DIY Subwoofers - General Discussion
    Hi guys, I have a chap who has the inuke 3000 dsp and we need to know what mode settings we need it set to. He is using one input and two sub outputs. I have my EP4000 wired the same way which is parallel but due to the new inuke manual being completely useless does anyone have one and know...
  9. Sealed Subwoofer Build Projects
    Dayton RSS390HO 15", iNuke NU1000DSP build Hi guys, extreme newb here. I was just messing around with winISD with the Dayton Audio RSS390HO sub in a sealed enclosure. According to the graphs below I can get 90+dB all day down below 20Hz in a 2^3ft enclosure with just 150Watts??? I got this...
  10. Electronic Processing/Equalization Devices
    Hi! How does the built-in DSP compare to the ever popular Behringer Feedback Destroyer ? I like the USB interface and the opportunity to have one less device in the rack. Has anyone tested these new iNuke DSP amps yet?
  11. Home Audio Subwoofers
    What am I doing wrong ?? I can't get this unit to work. I bought this Behringer I-nuke DSP1000 to power a MFW-15 Sub. I hooked up the driver. Got a balanced to RCA cable from mono price. Hooked up the input. Bought a Speakon 2 pole connecter( I already know I will need a 4 pole to have...
  12. Electronic Processing/Equalization Devices
    Hi, can i calibrate the Behringer iNUKE series (1000DSP/3000DSP/6000DSP) with the REW? (is this DSP compatible with the 2496?) Thanks a lot!
  13. Subwoofer Amps | High Pass Filters
    Hi everyone, I've read through the threads mentioning the iNuke here but couldn't find an answer to my question here or in the online setup manual. I've recently been considering buying an iNuke DSP for use as a stereo-subwoofer amp (2 subwoofers I mean) for a simple 2 channel stereo system...
  14. Two Channel Audio
    All I can say is WOW LOL Behringer unveils 8-foot iNuke Boom iPod dock under the Eurosound brand. Now this should turn some heads for sure, If you look carefully you will see an iPod touch sitting on the top of this new iNuke Boom dock for Apples devices. It measures 8ft wide, 4ft tall and...
  15. Subwoofer Amps | High Pass Filters
    Behringer iNuke NU1000 Amp Amplifier Fan Swap How-To w/ PICS & VID It has been a while since I have posted here - my original EP4000 fan swap thread got stickied so I thought I would post a part 2 of the new iNuke series using a fresh out of the box NU1000 I received this week in the mail...
  16. Ported Subwoofer Build Projects
    Why does my Sonosub sound louder with the top cap off?? Updated with some Pics Driver- Dayton Audio RSS390HO-4 Enclosure - 18" dia Sonotube at 8.8 cuf. Damped with pink insulation. Amp - Behringer Inuke 3000DSP bridged to 4 ohm mono I had the top cap off today while I was waiting for some...
  17. Subwoofer Amps | High Pass Filters
    Hi, Just got a Behringer iNUKE NU1000, I plugged it in and turned it on with no speakers or inputs connected last night for about 5 mins, today plugged it in and was ABOUT to plug in some speakers, I turned it on before I plugged them in and it started for about three seconds and then a pop and...
  18. Subwoofer Amps | High Pass Filters
    I just missed out on an ebay auction for an EP1500, I don't really have the money to upgrade to an EP2000 so how would an iNUKE NU1000 compare to the EP1500? It will be used for one CSS CDX15. Brad EDIT: Also If I could up the budget to the price of an EP2000, the iNUKE NU3000 is the same...
  19. Ported Subwoofer Build Projects
    Hey everybody. Been lurking for a little while now and decided to try a build of my own. I went with an 18"dia sonotube bought from whitecap supply cut to a length that would give me 8.8 cubic ft. Used mdf for the top and bottom cap and for the port I used the parts express 4" flared kit...
  20. Subwoofer Amps | High Pass Filters
    http://www.behringer.com/EN/Products/NU6000.aspx There will be 1000, 3000 and 6000 Watt model... Class-D is very common for SW amps. Very cool and using very little electricity. The iNUKE NU6000 delivers 2 x 1500 Watt @ 8 ohm. Would this be adequate for two Maelström 18"? There seems to also...
41-60 of 60 Results
Top