Home Theater Forum and Systems banner

kenwood

  1. Kenwood sw-32ht wont turn on.. dead?

    Two Channel Audio
    All - I have an OLD Kenwood Subwoofer, model SW-32HT - it came with a home theater in a box around 2000... Today I noticed that it wont turn on. Power button does nothing. Tried plugging it in to something else - nothing.. Is it dead? Is there anything I should look at? Thanks!
  2. Kenwood model Basic C1

    Two Channel Audio
    How is this unit used in a 2channel set up? Would I run my DVD player audio in it then out to Sansui amp or run DVD audio directly to amplifier? Thank you
  3. No audio from Kenwood VR 60RS

    System Setup and Connection
    Hello... I'm Chris & it's my first visit to the forum. I got hung on music when I picked up a guitar at age 12 and haven't been without several since. When I experienced The Beatles, it was all over. I knew I had to learn how to do that and I did. I've been fascinated with fine audio since the...
  4. Kenwood LS-1800

    Two Channel Audio
    There is a pair of Kenwood LS-1800 being sold locally (well 1 hr away) and they have piqued my curiosity. I have an affinity for vintage items, speakers are no exception. Add in the fact that they appear to be fairly rare and would compliment my furniture nicely and I'm ready to buy! But I did...
  5. dual kenwood 12s civic box

    Mobile Audio
    Hey guys, wondering if anyone can help me out with making a ported box for a 4dr civic, i'll be running 2 kenwood excelon 12's 4 ohms at 400rms each, I did quite a bit of research and still had a hard time finding out how to go about building my own box(design wise). I can have a max width of 36...
  6. Kenwood KR-797 bass and trebel control

    Remotes | Cables | Accessories | Tweaks
    I got this unit from my brother for dirt cheap. It came with five speakers and a seven band equalizer, but no remote. I am trying to find a way to adjust the bass and treble on the reciver (not the eaualizer), and all I find is how to do it with the remote. Is it possible to do without it?
  7. Kenwood receiver KR-V106R

    General Service and Technical Information
    Hello, First of all, thanks in advance for any input, suggestions or answers concerning this question. I have the above receiver, Kenwood KR-V106R. When i power the device up the only light that turns on is the "Power Stand By" light on the lower right hand corner on the face of the device...
  8. Kenwood KRF-V6030D - should I or should I not?

    Home Theater Receivers | Processors | Amps
    Hi all, Finally got some info from my friend with the surround amp in his shed waiting for me and was wondering whether it's worth getting as the price is a little higher than I thought it was going to be. The deal is a Kenwood KRF-V6030D and a DVF-R4050 DVD player (which I really don't want...
  9. Connecting a Logitech Z-2300 Sub to a Kenwood KRF-V5200D Amp

    System Setup and Connection
    Hey guys, I bought a Logitech Z-2300 system 2 years ago and today the Control Pod for the system decided to break, also my Sub that was connected to my Kenwood KRF-V5200D also blew up. I'm wondering if I'd be able to use the Z-2300 Sub and connect in to my Kenwood KRF-V5200D amp?
  10. Kenwood KR-V106R probelms

    Home Theater Receivers | Processors | Amps
    I have a Kenwood KR-V106R receiver and it has worked fine but now i find that the right side speaker will randomly cut out and now work until i shut it off and turn it on again. This process keeps repeating and is getting old. I have tried the other channel but the same thing keeps happening...
  11. kenwood lsk 2000 speaker

    Home Audio Speakers
    Hey im a new member. Im looking for some info on a pair of kenwood lsk 2000 speakers. I baught a set at a garage sale and i want to learn a little more about them. thanks:wave:http://images.craigslist.org/3mb3o33lc5Q45Z65P4a9213ac67fe7f5b1c5a.jpg
  12. Kenwood Km-895..Center speaker does not work..Help?

    System Setup and Connection
    I have a Kenwood km-895 amplifier home stereo system..Everything is connected properly, 2 side speakers, rear speakers, but the center speaker does not work at all when connected to the center speaker connection..the volume output for center is turned up, and the pro-logic is also on..I do not...
  13. Kenwood 103SW, repair or replace?

    Home Audio Subwoofers
    It seems that the amplifier in my old Kenwood 103SW has died. If I put any input on it at all it the peak light comes on and then it just starts to hum constantly. My question is: Should I replace the plate amp on this sub or just trash it and get a complete new subwoofer? My budget is quite...
  14. Kenwood AR-404

    System Setup and Connection
    As I am new to asking questions, but not new to screwing up, here goes. I was wondering if I would be able to safely bride the outputs for channels A-B. The whole idea here is to squeeze as much juice I can out of this receiver to power two speakers.
  15. Kenwood SS-992 "Protect" Mode?

    Home Theater Receivers | Processors | Amps
    Hey all, I just unearthed my old Kenwood SS-992 from my garage. We had it hooked up in my old house, but when we moved, procrastination set in. So today I found some free time and hooked it up, however, when I turn it on, it starts up and says "Dolby" and seems to be normal for a few seconds...
  16. HELP with Kenwood Spectrum 871 (KC-993)

    System Setup and Connection
    I have this home stereo and a few years ago the volume knob on the amplifier quit working. No matter which way I turn it, the volume shoots way up instantly, very annoying. Does anyone know of a possible solution, a do it yourself type fix? Thank you in advance.
  17. Kenwood

    Manufacturers & Vendors Reference Info Forum
    Kenwood USA Corporation www.kenwoodusa.com P.O. Box 22745 Long Beach , CA 90801-5745 310-761-8285 800-536-9663 Authorized parts distributors Herman Electronics PacParts Inc. East Coast Transistor Parts, Inc.
  18. Kenwood Home Theatre System Help Required !!!

    System Setup and Connection
    Hi I would like to know if you guys can help me hook up my HTB-504 Home Theatre system which has a receiver model # of VR-507. If you guys can help me out then i will provide more details of my issue/problem but if you guys can't help me out then can you kindly provide me with links to people...
Top