Home Theater Forum and Systems banner


  1. I accomplished something that I have no knowledge in...

    New Member Introductions
    Dear reader, I just finished roughing through my first speaker build. It's a set of Paul Carmody's OSMTM's, and in truth, they really aren't finished. I didn't buy enough of those tubes, and I haven't even screwed in the drivers. What I'm really curious in is that crossover... And I need a...
  2. Wanting more knowledge

    DIY Speakers
    Good Sunday afternoon to all! I am on this quest to build my own speakers. I of course would be using the work of another. Before I actually start, I thought I might try to increase my knowledge just a bit. Can anyone make a recommendation on either of these books? Ray Aldens Speaker...
  3. Thank you for your Knowledge, happy here

    New Member Introductions
    Hello, I am 54, have had some nice equipment over the years and in the last 10, just gave up due to space and bought the box sets, like Samsung 5.1. Well, all the kids have moved away, YEAH! and I have a basic 20X30 Room to dump a pool table and the ping pong topper to put this together, I am...
  4. Knowledge for me

    Home Theater Receivers | Processors | Amps
    I plan to purchace a receiver with the ability of operating without a processor or amp but would like to see a schematic of a system with both in place for my knowledge. I know how the amp would wire but only assume that the processor would receive the sig from say a blue ray and relay to a...
  5. General Acoustics Knowledge?

    Home Audio Acoustics
    I've been reading through the forums for a while and notice that some take acoustics very seriously, while others... not so much. I'm planning to build a dedicated theater and naturally would like it to look and sound nice, but really don't know or understand anything about acoustics. There...
  6. Joined seeking knowledge

    New Member Introductions
    Really I joined in a effort to better understand sound/room calibration. My first step is to attempt to learn how to use REW. Im trying to learn how to measure and adjust for a flat room response.
  7. Need knowledge of sonotube build

    New Member Introductions
    I sold my svspb12plus2 tonite alittle sad but riding that dyi sonotube train! I was modeling a pair of 24 '' as well as a 20'' using sdx-15 drivers tuned to 14hz 365-400l 80%ht i have a chose in power of a pair of behringer 4000 bridged at 4 ohm or a crest ca12 and a deq2496 and leaning toward...
  8. A little knowledge

    Computers | HTPC | Media Servers
    I actually came to this site looking for info on a good graphics card for my PC to set it up to do HDMI networking with my LCD TV when I get it. I'm putting together a basic PC to do the job and graphics cards are one thing I really have never dealt with, not being a gamer and not having a need...
  9. I need a little help from the guru's vast knowledge.

    REW Forum
    I've been using REW with my BFD (1124P) for many weeks now. I've learned a lot from this site and I have been very successful up until this point. My problem is that I got a new sub... Here's a quick pic of the new sub (it's the one in the middle): Before anyone asks: no, I don't have both...