Home Theater Forum and Systems banner
1-5 of 5 Results
  1. Sony
    Hi All, I have a Sony TV Model number (KP-46WT510). Nowaday's TV picture fuzzy or blurry.it's look 3-D, wavy, distorted, etc. I have adjusted convergence in the menu but it did not adjust. How can I fix my tv problem? Thanks in advance. Nadeem
  2. Sony
    I have recently repaired a KP-46WT510,the set was purchased in 2004 and recieved lots of use some how it was knocked over about 6 months ago and the protective screen was cracked but other than that nothing apparnet seem to have happened ( it didn't hit the floor but rather landed at a 45 degree...
  3. Sony
    My set recently displayed a rather typical convergence issue with RGB seperating, the flash focus tool did nothing to alleviate the problem, and I couldn't move red or blue up/down or left/right in manual convergence. I ordered a kit for my tv from tvrepairkits which I believe is familiar to...
  4. Sony
    I did a convergence chip job on a "510" couple week's back, and every thing went smooth. But with that TV I was able to do a manual convergence from the Menu. Now I have the same TV but a "500" model in front of me. The TV is working fine, and the flash focus does it's job, but the manual...
  5. Sony
    :wave:Hi Mr. lcaillo, I want to first of all thank you for the in depth guide which helped us somewhat understand the basics of CRT based RPTV convergence. We appreciate that you would take time out of your busy schedule to author such an invaluable resource for the DIY audience. As we read in...
1-5 of 5 Results