Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Sony
    Hey all, I'm new here but it was this particular thread that got me here. :) I recently snatched up a free Sony KP-57WS510. My neighbors were giving it away. It was in working order for about a week. One night my daughter and I were watching Casper on Laserdisc. We fell asleep and the TV...
  2. DIY Repair and Maintenance
    I have a Rear Projection Sony 57" (KP-57WS510) with burn-in from years of watching standard definition programming in 4:3 aspect ratio instead of HD 16:9. The sides of the screen were displayed as grey bars during those years of SD programming and now has left some noticeable burn in on the...
  3. Sony
    It seems my 57" Sony (KP-57WS510) is starting to have convergence problems on the initial power on. It will correct itself after 30 mins or so but I have decided to attempt a IC chip repair. After reading many posts and searching for replacement IC chips, It seems that the Sanyo original OEM IC...
  4. Sony
    Recently the screen of my KP57WS510 got damaged (yeah, I screwed up!) so I parted the set out. While selling the D board I found something interesting - though the service manual only shows the 57 & 65" sets using the A-1302-180-A board it seems the 51" sets did too. In fact the lady I sold my...
  5. Sony
    Hi i just did the convergence repair found no fuses or resistors bad installed the new covergences and reinstalled tested and found red will not fouces or adjust.Went back and rechecked the fuses and found one of the convergence fuses is open. Replaced the fuse with new 3.5 amp fuse that was in...
  6. Sony
    Hi Guys, I just picked one of these units up. I wasn't really in the market as I'm pretty busy right now but it was just too tempting - literally the conversation went like "we're moving tomorrow and we're NOT moving a big, heavy, broken TV - come and get it"! I picked it up but had to store...
1-6 of 6 Results
Top