Search Results for ‘length’

Hello, I did a search and didn't quite find this question so here goes. I purchased 100ft of 14ga speaker wire (monoprice). My current speaker placement would be in a 12x10 area (the room is actually 12x20 including dining room). Should I... A) cut only the minimum I would need for speaker...

is there any way that an irregular sized port would have an effective equivalent length to that of an "normal" port for winisd modeling. Because my port have a 3.8" outer diameter then after 4" in length the diameter is reduced to 3.5" and after about 2" in length it would finally come to 3.25"...

I have a home theater now that is open on one side. I'm thinking about closing the open side off so I can soundproof the theater. However I want to make sure I don't create some nasty room modes. I remember that I should avoid multiples of each other in the dimensions (ie length 2x width...

I was wondering what the longest HDMI cable run people have tried (and succeeded) when connecting their Mitsubishi HC1500 Projector. My current proposed setup calls for a 46' cable run connecting my Yamaha HTR-6080 receiver to my projector. The run would consist of a 6' cable, then a manual push...

Trying to connect a computer to a panasonic projector. I have a monoprice 50 ft vga vga cable but the colors are very washed out. Lots of blues not much red. Just not a good picture. When I connect the computer with the 6 ft cable (sitting on a ladder under the projector) everything works...

Okay, I am sorry if this has been asked but what is the maximum lenght a HDMI cable can be without signal loss? I guess I should have read through the forum more. It appears that this has been asked a dozen times. Sorry everyone.

I'm getting some pressure for the wife to finish the HT. One of the things we love to do is play Dreamcast on the big screen (Sega fishing is a blast when it is big). My projector (Sanyo PLV60) has a lot of inputs, one of them being BNC, and the other being a straight VGA 25-pin connector...

I must be having a major brain fart today since I feel like I missing something regarding port length with and without flares. I've read the WinISD help and Collo's website already. If you are supposed to add 1/2 of the flare radius to the straight tube length to get the effective port length...

For the past month or so, I have had the family computer down in the basement doing REW measurements and tweaking. This past weekend I had to move it back to the usual location. The usual location is in the family room which is about 15 to 20 feet away from the basement theater room. I have...

I am curious as to the maximum length of a HDMI ver. 1.3 cable that can still carry full 1080P along with all high def audio when that audio becomes available? Mike