Within reason, of course.
I'll likely place my amplifier off to one side vs. centered between the front LR speakers due to space limitations, sooooo.... the speaker cables are going to be different lengths. I'm sure I'm not the only one with their amp off to one side leaving 3 or 4 feet to one...
(smoothed 0.2ms for easy comparison)
These graphs were taken one after the other. No changes at all.
Red = 128k
Orange = 256k
Green = 512k
Blue = 1M
Why do the reflection levels change based on measurement file size?
The data for the other measurements changes as well.
Well I just purchased a SVS 13.5 ultra driver for a really good price. I want to build a box for this but need a little help. I'm not very good with the win program yet so need a little help.
Based on the SVS driver what size of box and if I used 3 to 4" port tubes, what lengths would be...
If I use a length of 128, my graphs look reallllllly nice and impressive (to me anyway). The higher up I go in length, the worse they look. At 512k, I get a complete null drop at every 50: 50hz, 150hz, 250hz (see attached).
I'm thinking that my PC must only be able to handle the 128 Length...
I am thinking of putting my laptop in another room which would mean my cable from the sound card to RS SPL meter would be 25' and from the Soundcard to the AVR is 16'.
Any concerns with these cable lengths ?