light

Hi :wave: I've been reading threads with great interest as I searched for a similar problem... but to no avail. Here is my issue: about 2 years ago I experienced a deflection problem that was corrected in house by a service tech as the set was still under warranty. Not to long after that the...

I have a rca hd52w59 tv 1st problem i had was the tv had a rainbow in the midle of the tv with no picture on the top half and a some what normal picture on the bottom half. I bought a used deflection board and put my flyback on it. then i had a new problem. now no picture and the power light...

I own a Mitsubishi WD 57734 DLP (2yrs and 3months old)… A few months ago every once in a while over a three month period the TV would stop working and the RED lamp light on the front of the TV would light up. Restarting the TV would appear to reset things and no issues for weeks. I did see...

I have had this tv (Sony KP-61HS10) for many years now and have recently replaced it with another but cant bear to put it out to pasture despite its problem. Im hoping that i will be able to get some suggestions on where to start to keep it as a second tv. I have a few things that are not...

I am looking for a light switch that can be controlled with logitech 880. I couldn't find anything.. anyone knows? It doesn't need to be a dimmer, actually I prefer discreet on/off

Hi All - I have been surfing around the DIY Screen board for the last couple of weeks. The amount of information I have found is just overwhelming. I really enjoy reading about all the testing people have done on the various types of screens. There seems to be a lot more going on here than...

Good morning! I spoke with a Mitsu 52" owner yesterday who had the same smokey picture on his rear-projection unit. He said the only thing that fixed his problem was to send his "light engine" out to California for two weeks. My question today is, "When he spoke of the "light engine" do you...

I have an RCA HDLP50W151 that needs a light engine.. Is it something that I can repair? Or do I need to buy one? Anyone have any experience with these? Where can I get the parts and or light engine its self. Thanks Phil

Hi Leonard, > I had posted on a couple different online forums dealing with the > Mitsubishi green blinking light and you had responded tothose posts. I > wanted to relay to you the status of my situation. I have a Mitsubishi > WS55511 that I purchased in Dec 2002. The blinking light started >...

Thought I would bounce this off of the forum members and see what you think. So I started to construct MDF and drywall isolation boxes for my can lights and got to thinking about installing them. I don't really want to purchase the sound isolation clips to mount the boxes as it will end up...

“Samsung is addressing the light tunnel “border-shadow” effect that impacted a small percentage of select 2005 and 2006 model year DLP TVs. Customers who own a Samsung HLR or HLS model year DLP TV, and experience a “border-shadow” impact caused by the light tunnel, should call Samsung’s service...

I have a Toshiba 43HX71 which will not turn on. When I turn it on after plugging it in, the red power light comes on briefly and then starts to flash. About 4 months ago I had some convergence problems and thanks to the great information on this site, I replaced the two IC chips and the TV was...

As i stated all 3 crts project colors on screen with lines in center of screen only 36in x 36in and there is no video or image only colors. i can go to focus block and turn each color up or down. have never seen this Please help ! Any advise at all would help I have searched everywhere on...

International Light Technologies, Inc. www.intl-lighttech.com/tv-lamps 10 Technology Drive Peabody, MA 01960 978-818-6180

Trying to figure out a way to stop the blinking madness while still being able to see it when I need (so no tape or paint). The LED flashes when in standby, which is of course annoying. [/B]ut less obvious and unmentioned is that it's a ******** bright LED when the unit is powered on. Not so...

I replaced the capasitors in the DM board. Still had the green light. Took a blow dryer to the board. While it was in the TV. When the green light stopped flashing. Turned off the dryer and turned on the TV. Has been working ever since. I guess the board was cold. Someone told me about this. Can...

I couldn't find the exact situation im experiencing on the forum but if it has been addressed I'm sorry. I have a WS-55857 and I went to turn it on yesterday and there is no picture or sound. The green power light comes on and stays on just like normal but the tubes never come on and there is...

I have a PT-AE3000 Panasonic and am deciding on a screen. Options include mechanical tab tensioned (Elite or other brand) screen or a DIY custom size screen. I am looking over various options, but was looking for feedback from owners of this projector for suggestions re: the best screen or...

when i decided to build my hT I looked at the rooms in my home that could best fit the build requirements. I considered the living room but found it was too open the hard to control sound and light. I then considered a spare bedroom. and while that would work the room size would limit the...

After unplugging the tv before it properly shut down, we now have the infamous blinking light. I've done reset, left it unplugged over night....just about everything I can come up with after hours of research. Our next alternative is to call a Mits authorized repair person. I've noticed on a...