Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. DIY Subwoofers - General Discussion
    To be short and sweet I'm just curious. Now with the price increase of tc sounds drivers. What do people think are a similar alternative to the lms-r line of subwoofers. Hopefully there is something out there that come close to it's characteristics I.e. Work well in small sealed boxes,high...
  2. Ported Subwoofer Build Projects
    I currently have 2 Epik Sentinel subs (12" Slot Ported). They perform fairly well, and the box is well braced. There is a slot port that runs the full width of the front of the enclosure and it is 1" tall, 13" Wide, and 22" long. They have an internal plate amp rated at 600 watts RMS. I believe...
  3. Ported Subwoofer Build Projects
    I have finally decided that I would like to start my first HT and music sub-woofer build. Like in the title i have chose to use a TC sounds LMS-R 15" sub with a EP2500 and FBD. Ultimately I would like to have a tunable enclosure with a changeable port for HT use and music (AKA party) use. I have...
  4. DIY Subwoofers - General Discussion
    I am starting a new ported build in 4 to 7 cu feet Ftune 20Hz and i narrowed my choice to these 3 drivers: Mach5 IXL15.2.2 the SoundSplinter RL-p15 and the TC Sounds LMS-R 15 :sn:, the latter two share the same price, where RL-p15 has more impressive, juicier motor So i did some simulation, The...
  5. DIY Subwoofers - General Discussion
    Finally got my TC Sounds LMS-R 15, planning to power it with a EP4000 and have a Reckhorn for the 15hz highpass. Dimensions are going to be, width25 depth25 highth50 giving about 8-9ft3, and it is going to be tuned to 20hz I have some pics of the braces and port Ill get them up soon...
  6. DIY Subwoofers - General Discussion
    Hey everybody. I am hoping somebody could help me out with a few questions. I built a behind the couch sub about a month ago and have decided I want to remove that sub and put it in the wife's car. However, I want to continue using the box I built. The box dimensions (outside) are 14x14x51 with...
  7. DIY Subwoofers - General Discussion
    One of these will be going into a 3 cubic ft. vented enclosure with a PE bash 500 amp with the modified resistors set for 2db boost at 16.2hz. Because of subwoofer location (wifes decision) this is the biggest box I could get away with. Any suggestions or thoughts?
1-7 of 7 Results
Top