Home Theater Forum and Systems banner

lmsr

  1. LMS-R 15 Sonosub Build

    Ported Subwoofer Build Projects
    TC Sounds Sonosub Build I am starting a new build which should provide with more extension below 25Hz. The driver choosed is the tc sounds LMS-R 15. I want to thank Mike for helping me with the modeling. Decided to go with 230L net volume, Ftune is 19,76 Hz which comes from two 4" serially...
  2. Four LMS-R 15 & Two Ultimax 15 sealed --Sweden--

    Sealed Subwoofer Build Projects
    Hi! Helping two friends with a bunch of subwoofers. Drivers used in four of the cabinets is TC Sounds LMS-R 15" and in the other two Dayton Audio Ultimax 15". T.amp ta2400 mk-x will be used in both setups two power these beasts and Linkwitz filters amplied with a minidsp 2x4 balanced...
  3. LMS-R 12 sealed ~1 cu ft

    Sealed Subwoofer Build Projects
    I'd like a small pair of subs for HT and was wondering how sealed cubes based on the LMS-R would stack up against some of the nicer commercial subs I'm considering. Obviously price is better for DIY (assuming its DIY and not 'DDDDDDDDIY'), but I'm more interested in performance available in a...
  4. Amp Selection for dual 12" lmsr

    Subwoofer Amps | High Pass Filters
    Looking for an amp to run a dual ported 12" lmsr project. Want something that will have plenty of power to push them preferably with some sort of DSP or high pass filter adjustment. Seen posting on Behringer, crown and QSC. Thoughts on those models? I have seen that Vega and Peavey make some...
  5. 2 TC sounds LMS-r 15" VS 1 5400 18"

    DIY Subwoofers - General Discussion
    There is a semi local person selling 2 TC sounds lms-r 15" for a reasonable price. I was thinking of doing a sealed 5400 18" before these came up for sale. I would be putting each of the 15" in sealed boxes and running them with a behringer ep4000. This should put 2000 watts into each sub. Then...
  6. LMS-R 15 Driver

    DIY Subwoofers - General Discussion
    I have been looking at this subwoofer really hard in the last couple of days. If you had a choice between the SI 15 or this one, which one would you pick? What amp would you use?
  7. Dual TC Sounds LMS-R 15s build log

    Sealed Subwoofer Build Projects
    Hello all! I have been planning my first home theater build for a little while now, and I am ready to start building. I am using 2 TC LMS-R 15" drivers with a inuke 6000 to power them. Each driver will be wired at 4 ohms. As for EQ I am using the Velodyne SMS-1. I can not wait to hear them for...
  8. Dual TC Sounds LMS-R 15s AMP?

    Subwoofer Amps | High Pass Filters
    This is my first DIY subwoofer, and my next step is to find a amp that will power them. What would be a good amp for these subs. It will be a dual subwoofer system each one in a separate sealed box. The TC site says it can handle 1000 rms watts and the peak is 4000 watts. I have looked at...
  9. Amp recommendation for TC Sounds LMS-R 15 & SDX15

    DIY Subwoofers - General Discussion
    Need some suggestions selecting a amp for my subs ... TC Sounds LMS-R 15 & SDX15 in 13 cu ft vented boxes I am looking for the best value power amps to run these drivers ... the subs are located in a riser in the theatre with 12G wiring running to a remote electronics closet under the stairs...
  10. Lms-r 15 sonosub

    Ported Subwoofer Build Projects
    Hello I'm in the process of planning and making myself a ht room. The idea was to make 2 llt using tubes and fit them with lms-r 15's. What seems like a good option to me is to go with 300-350L and tuned at about 12-13Hz. But since I've got very little experience with modeling boxes and...
Top