Home Theater Forum and Systems banner

loud

  1. Ported Subwoofer Build Projects
    I have a little project I could use some help with. Putting together this enclosure for a friends Truck. Drivers: Kenwood KFC-W12PS (free) He wants loud, I guessed 35hz tuning frequency would be ideal. Ran it through ISD and it seemed a 2cf enclosure for each driver with a 4" by 14" port if I...
  2. AV Home Theater
    not sure where or what to do with system Pioneer VSX-424-k receiver and my leftover JVC surround sound speakers with a Pioneer SW-8MK2 sub when i first setup system everything worked the Blu-ray movies the PS3 and even the Directv, a few months ago everything worked except the directv and then...
  3. General Service and Technical Information
    So i turned my receiver on yesterday and a really loud buzzing noise come from all my speakers.I turned it off and back on again,still the same noise.I turned the volume down all the way and it was still making the loud noise.I have had this reveiver for a month with no know problems until...
  4. DIY Subwoofers - General Discussion
    As of right now I have 1 Marty Cube w/ a SI HT18D4 soon to be one more both of these will be powered by nu3000dsp. ( right now I have the amp hooked just to one ) In order to satisfy my curiosity is it possible to run 2 more subs, I am not expecting them to go as deep and was wondering if 2 12"...
  5. New Member Introductions
    I finally got what is the best quality sound system I've ever owned. I'm looking forward to the input from everyone on this site so that I do things correct. I'm still learning terms for connections and how they work. I'm hoping to get enough feedback so not to have to pay someone to connect my...
  6. Home Audio Speakers
    Hi everyone. I purchased a Tascam PA-R100. It is rated for 80 WPC, but the speakers I have hooked into it have a rating of 50 RMS. The receivers max volume level is 80, and I have to turn it up to 55 to get a good surround sound effect, at 35 I can barely hear it. It seems like my receiver...
  7. AV Home Theater
    At my age, being able to afford quality equipment, my volume knob knows no bounds. Hahahhaha, that is until the cops show up... childish, I know.
  8. Home Audio Speakers
    Does anyone have any first hand experience with this little speaker? I'm going to put together a budget 2.1 setup and these seem solid for the price.
  9. Pro Audio
    Hi everyone, I'm currently working on a track for a Pop-Punk band. I'm trying to get my drum tones sorted before anything else. What I'm already doing is parallel compression for all the elements in the kit and a drum room reverb on all the elements with a low cut till 70 Hz so that the lows...
  10. Creative Sound Solutions
    We are pleased to announce the V series of loudspeaker kits. The V3 at $399.95 is the third of three and uses a VWR126X and the new LD22 tweeter and fits into a standard 0.25 cu ft sealed cabinet which sits on top of a LDW7 woofer mounted in a ported 1 cu ft cabinet tuned to 28hz. If you...
  11. Home Audio Speakers
    I'm wondering if anyone out there has paired up the very well reviewed Pioneer speakers (SP-BS21-LR, SP-BS22-LR, SP-FS51, or SP-FS52) with a half height Marantz 50W receiver (NR1403, NR1404, NR1504, NR1603, NR1604, etc.). If you have this combination, do you find that your receiver is able to...
  12. AV Home Theater
    I watch moderate to low.
  13. Remotes | Cables | Accessories | Tweaks
    I was dusting behind the HT rack and noticed that my wife's Scentsy candle cauldron had poured into both of the power-strips sometime, shorting out two of the open outlets. Thankfully my house didn't burn down! So I decided to upgrade to the Ethereal 2000 power manager so I can have the surge...
  14. Home Theater System Recommendations
    I am currently looking for a sound system to install in a room that is about 20x12. 20 feet in length, 12 feet width. The one thing I am in love with, is bass... I want this system to be able to be hooked up to a laptop, so auxiliary compatible. It needs to be extremely bassy, but obviously...
  15. Home Audio Acoustics
    I have 8 ft ceilings so I ran this mode program and that gave frequencies of 70/140/280 etc and yes, those frequencies are WAY too loud where I sit in the room (roughly 40% from one wall and a tad off center). So, I made 2' x 2' x 4" mineral wool bass traps and hung 12" from ceiling OVER the...
  16. AV Home Theater
    So... I was watching Bourne Legacy on BluRay last night for the first time. When the disc/BDP transitioned from the Main Menu to begin the movie, there was a very loud "CRACK" then the sound went dead but the picture continued without missing a beat. My receiver's safeties must have tripped...
  17. DIY Subwoofers - General Discussion
    so i have 2 18" ascendant audio avalanches. one is wired to 4ohms(they're d2 ohms) and installed in a 9.5 cu ft sonotube tuned to 17hz. i have an ED lt1300 plate amplifier. this is NOT loud and its barely moving!!!!!!!!:sad2: the volume on the plate amplier is at the 12 o'clock position, the low...
  18. SVSound
    Hi again ! Need to ask here again. I've switched countless of times between the 20 hz and the 15 hz modes on this great subwoofer. When in 20 hz - I get the feeling of much more power, hair moving experience in certain movies - eg live free and die hard - bridge collapsing from harrier rockets -...
  19. REW Forum
    Im using my PC microphone in (realtek motherboard input on Gigabyte x79-UD3) Ive calibrated my soundcard as per the instructions Set maximum windows microphone gain (30db). Set max input level. DAYTON AUDIO EMM-6 ELECTRET MEASUREMENT MICROPHONE with calibration file Stageline EMA-200 Phantom...
  20. Official DVD and Blu-ray Reviews
    http://www.hometheatershack.com/gallery/file.php?n=8601&w=oTitle: Extremely Loud and Incredibly Close Starring: Thomas Horn, Sandra Bullock, Tom Hanks, Viola Davis, Max Von Sydow, Zoe Caldwell Directed by: Stephen Daltry Written by: Eric Roth, Jonathan Safran Foer Studio: Warner Bros Rated...
Top