Home Theater Forum and Systems banner

mach5

  1. Ported Subwoofer Build Projects
    Not sure how to upload sonosub details :ponder:
  2. General Service and Technical Information
    Hello, I build my first sub a while ago, the box is terribly made so when it started rattling at any audible volume I though it was just my terrible box. Recently I had another look at it and touching the cone fixed the issue. Running an oaudio 300w amp though it might be clipping the poor...
  3. Ported Subwoofer Build Projects
    I'm playing around with Sonosub.exe and winISD and have come up with some measurements. A few questions: First: The area after(lower) the tune frequency, should I put much thought into this ? I was under the impression that below the tune frequency, distortion rises quickly. So for example...
  4. DIY Subwoofers - General Discussion
    Recently a sewer backup caused my mdf ported subs to get ruined. after salvaging the drivers(ixl-18.2) I decided to try sealed cabs.(smaller Any ideas on optimum size for these for the lowest possible tune and still have that mid bass. Thanks
  5. Classifieds - Speakers and Subwoofers
    I have 4 IXL 18.4 subs BNIB, never opened. I also have four used IXL 18.4 subs that I'm willing to sell as well. I've decided to do an IB with 8 Fi IB318 woofers. These IXL's would work IB, but they are really designed for LLT. Looking to get $150 ea for the used ones and $225 ea for the new...
  6. Ported Subwoofer Build Projects
    seeing how my sealed enclosure is nearly finished and i'm now quite comfortable with a sub build, i would like to hear any feedback on my next multituned slot ported enclosure. i'll be using mach 5 ixl15.2.2 with a behringer ep4000 to drive them. each driver will get one channel. i'm guessing...
  7. DIY Subwoofers - General Discussion
    If you haven't heard, Mach5's new 18" driver's T&S specs were released today. I tried modeling up a few enclosures but was running into a problem. To keep the tuning down in the mid teens and the port velocity within reason it was spitting out port lengths over 50"... I probably input something...
  8. Classifieds - Speakers and Subwoofers
    I want to buy one Maelstrom 21 or Two Mach5 18.2.2 PM me if you have some you are willing to sell.
  9. DIY Subwoofers - General Discussion
    I am starting a new ported build in 4 to 7 cu feet Ftune 20Hz and i narrowed my choice to these 3 drivers: Mach5 IXL15.2.2 the SoundSplinter RL-p15 and the TC Sounds LMS-R 15 :sn:, the latter two share the same price, where RL-p15 has more impressive, juicier motor So i did some simulation, The...
  10. Classifieds - Speakers and Subwoofers
    1. Product: 18" Mach5 IXL18.4 sub 2. Specs: Rated 800-1000 rms. single 4ohm 3" coil. triple stacked magnet 3. Description/Condition: Brand new reconed. 4. Price: : 220 shipped 48 states 5. Pictures:
  11. Home Theater Systems | Equipment
    I built this baby from the ground up and I've been in HT heaven ever since. I moved the SS RLP-15 subs for rear sub duty and the fronts have two Mach5 18.4 subs in 12cuft cabs.:hsd: Here's the build: http://www.vitod.zoomshare.com/1.shtml/HT%20in%20PA Latest subs: Mach5 18 2.2 HSU MBM-12 SS...
  12. Classifieds - Speakers and Subwoofers
    I have an Mach5 Audio MJ18-M for sale. Its in great condition. Used with about 500-600 watts from an ep1500. You can check the build log for this sub's enclosure if you want. Price is 140 shipped 48 states. OD: 18 1/8 inches ID: 16 1/2 inches Depth from back of basket: 8 inches Depth from top...
  13. Mobile Audio
    Today and yesterday i have been working on a box for the IXL12, i was going to make a very quick test box but i decided to put some effort into this box as it will probably stay in the car for a while now as the focus turns more to the front stage First step is the plan, nothing complicated...
  14. DIY Subwoofers - General Discussion
    I'm looking for couple of relatively inexpensive 18" subwoofers for sealed enclosure project. The Mach5 IXL 18.2.2 seemed to fit the bill. I tried modeling it for a SQ, as close to Qtc .707 as possible - the model showed that it'll work if the enclosure is 2.2ft^3 (62.8L), that doesn't seem...
  15. Ported Subwoofer Build Projects
    i am moving into a bigger house and want to get a sub, i plan on getting a ep4000 and either 1 Maelstrom-18 18 or 2 IXL-18.2.2 i would like to use a sealed box with 2 passive radiators. the Maelstrom-18 may end up slightly less expensive. the box shown is 13.4 cubic feet and would have 1200g...
  16. Classifieds - Speakers and Subwoofers
    I already have one, and I'm very interested in getting another to compliment this one, but I can't seem to find one for sale anywhere - so I'm looking here. Please help me!
  17. Testing
  18. Classifieds - Speakers and Subwoofers
    FS: US-TN. Mach5 MAW15, Dayton 240 watt noboost. So I've had this MAW15 for a few months, and it's served me well - but I would like to move to 2-4 12" in. subs instead for placement reasons. It's in like new condition - but I don't have a box for it, so I'm not sure how to go about shipping...
  19. DIY Subwoofers - General Discussion
    Hi all!! Well, I am currently awaiting the delivery of my new subwoooofer. ETA is in 2 more weeks, so I am getting pretty excited now. Mark is a wonderfull guy to deal with and I would just like to give a nod in his general direction for the professionalism he has shown in handling my...
  20. DIY Subwoofers - General Discussion
    I've been searching around the net for a few weeks now and this forum is a wealth of info. I'm not sure how to use the encolsure design software so I was wondering if someone would have a good design already for this sub. I will be using a ep2500 for the power and currently have 2 servo 15's...
Top