Hello:) I currently have one Maelstrom 18" Gen II and one LMS ultra 18", each in a 3 cf sealed cabinet, with their own EP4000 amp. I wanted to look into building 2 new cabinets that are LLT. I must forego a sonotube, as I can only do the following dimensions: 17" deep, 85" high and 33" wide...

I was wondering if anyone had experience with both. Which one was a better overall driver for HT on paper?

After several attempts, I don't feel these will work well in my room. I would like to sell with the Sonotubes if anyone is close to Dayton, Ohio and is interested in picking them up. They're made well. I hate to destroy the tubes, so hopefully someone can take them. Right now I'm taking...

Just like the title says, I was installing the driver and I sheared off one of the positive binding posts. I've emailed Kevin, but I was wondering if anyone had any of the blown ones laying around for spare parts before he gets back to me. I'd be willing to compensate for time and quick shipping.

I want to buy defective Maelstrom X's as scrap. I want to repair them for my own use,and will absolutely not resell them as per Kevin's request. I will buy them knowing they are defective and only worth scrap price. Thanks!

i am ready to start a maelstrom sub project here is what i have 1 new maelstrom 1 8inch piece of sonotube 39 inches long 2 ------24in x24in x24 in[approx] mdf sealed boxes 1 new ep4000 for power i want to join the 2 boxes together to form 1 24x24x48 box . i will have 12.3 cuft...

I was wondering how these drivers are holding up for people now some time has passed. I'm not refering to the later failed batch but the earlier successful batches. I purchased a gen 1 21" driver back shortly after release and took awhile to make a cabinet. I was really happy with the outcome...

So here is the stuff I have for the build: 2 QSC PLX 3402 2 Exodus Mal-X 18" 4 Exodus 18" Passive Radiators (washers for 1625g each with bolts for tune) BFD Reckhorn B2 1 Crown K2 (currently driving 2 12" cheapo subs I have now) I bought this all a while ago and then wired a new 20A circuit so...

I have kicked back and forth so many times what I want to do for the sub(s) in my new setup. I have sat idle for quite a long time, due to many factors, but am getting back on track. Ordering a new VSX-53 this week and likely components for my L/C/R in a couple weeks. But I still have the (2)...

Hi, I have a M21 that is about 1 yr old that has recently started making a funny metal ringing noise. At first I thought it was my box but I just took it out of the box and ran some test tones and it makes the noise at any frequency if I turn it up enough. The noise reminds me of like an old...

there is some one selling a Exodus Audio Maelstrom Gen. II 18 dual 2 ohm sub by me and i a few questions about that sub. first has anyone else put one of these in a vehicle cause most use it for home audio. second what would be a recommended box in a 01 tahoe, sealed or ported and what cuft? i...

Hello Everyone, I have been running a sealed Maelstrom X in a 6^ft box powered by an EP4000 in bridged mode. I have recently finished building a second identical one and it is powered by a seperate EP4000. I wanted achieve smoother in room response as my front seats had some null points around...

I want to buy one Maelstrom 21 or Two Mach5 18.2.2 PM me if you have some you are willing to sell.

Hi I'm selling my Gen II Mael-X 18" subwoofer driver. It's currently loaded in a large sealed box. Purchased about a year ago - used mainly on the odd weekend for movies. Excellent condition - never abused/overdriven. Paid $495 + shipping. Offers? Winnipeg, Manitoba Canada R3C0V8 for...

Hello everyone, As my Maelstrom X 21 is on it's way, I have to start planning the woodworks. I have modeled an enclosure to obtain a nearly flat frequency graph and reference output levels from about 12hz upwards. This is my first DIY loudspeaker project based on my reading and understanding...

I currently have two DIY 1259 sealed in 3.5 ft^3 each. Each one is powered by a Parts Express Bash 500 plate amp. I built them in 1998, when they were powered by a home audio Carver M-500t, but later upgraded the Bash plate amps. I have enjoyed them, but really NEED more and deeper output in my...

Hi everybody! I promised to make a build tread in my planing tread: http://www.hometheatershack.com/forums/diy-subwoofers-general-discussion/27625-diy-subwoofer-recommendations.html The drivers are two 18" Maelstroms and they will get a 550 liter cabinet each. 13Hz tune. The aprox external...

I am planning to build a pair of ported enclosures for Maelstrom 18" drivers. I will be using a pair of Dayton 1000w amps until I can upgrade. I need some help on enclosure dimensions, tuning ect.. These will be used exclusively for HT. I like designs with a "slot port" under the driver on...

A few months ago I bought material (BB ply) except the woofers to build the Maelstrom 18" with 2 PRs. But i am having second thoughts since the PR price has gone back up. Now this is going to be used in a 120 sq ft room for HT. I think I may want to try a sealed 21" because it is easier to...

I am planning to move to a smaller place and there is no way I'm going to be able to fit two subwoofers at over 9 cubic feet each into the new residence. I am selling as a package an 18" Exodus Audio Maelstrom subwoofer driver, two 18" Passive Radiators, and the weight kits for the passive...