Home Theater Forum and Systems banner


  1. Calibrating sound card manually by measuring voltage

    REW Forum
    Hello, I just finished building a pair of speakers and I wanted to take a look at the spl spectrum. I installed REW, got a USB-mic with calibration file and started measuring. When measuring the speakers, I noticed a dip at 500Hz, 4000Hz and around 13-14 kHz. I measured different other speakers...
  2. NanoAvr-DL, bass management, manually EQuing

    Audio Processing
    First, I am pleased to announce that my NanoAvr-DL is functionnal. Dirac and Rew graphs for my fronts speakers are reconciled (thanks to a new bd-player, the old one was the culprit even it was upstream!) I have successfully made a Dirac project for my 5.1 system and, everything works ! (je...
  3. Manually adjusted convergence in RPTV, Self Focus no longer works, Blue glow

    As a former unregistered lurker, I want to give a shout out to lcaillo for his excellent and detailed feedback to posts. It's been very helpful. I have a six year-old 42-inch 480i/480p/1080i HC-P4241W CRT Rear-Projection television from Samsung. It's been great, but I noticed some convergence...
  4. Using test CD to manually input measurement?

    REW Forum
    I do not have a receiver so I am trying to measure using a test CD of the provided Sine waves on my XA2 DVD player. The player has analog output connected directly to my amplfiers and the subwoofers. I used Windows Media Player to burn an audio CD of the files and I measuring with my Digital RS...
  5. manually plotting response

    Electronic Processing/Equalization Devices
    Hi all, I’m new to this home theater thing, I have been reasearching for a long time and finally went out and built up my 5.1 system with HTD level 3 speakers all around and a SVS PB12-plus2 for my sub. I’m not as happy with the sub as I thought, my general issue being that I can hear the sub...
  6. Anybody with Yamaha receivers (1600) manually setting channels??

    Home Theater Receivers | Processors | Amps
    When I try to set up the channels manually the receiver cycles the test tones through all the channels and it won't let me adjust the channel with the RS meter? It cycles through all the channels and it's just upsets me to no end. The auto setting is easily to do, but want to do it myself!! any...