So I received a miniDSP UMIK-1 for Christmas and wanted to take some measurements in my home theater room. I read through the long manual for REW and I have to admit that about 95% went way over my head. No big deal, I figure I start easy and basic.
I should probably explain my setup. It's a...
Hi, I've been using Rew for a couple of years, so I do know the basics. I have an old laptop running XP that I use to take room and frequency measurements. I've never been able to make it take an impedance measurement though, so I've always used my desktop for this. I use a homemade jig and it's...
I just installed a sound system in a restaurant and I'm trying to calibrate it now.
The system is Cornered Audio [http://cornered.dk/professional/products/] with Quest amps [http://www.questaudio.com.au/amplifiers/qa/] and a Xilica XP-8080 processor...
- Yamaha Hs 7
- Mic: Behringer ecm 8000
- saffire pro 40
- room: 500x500x217 (l x w x h)
- speakers are 80cm away from back wall
- distance between monitores are 106 cm
- monitoring position is 270cm from the right and 230cm from the left wall
- software REW
We measured 5 positions...
Sorry, my english is not good, and I use an software.
This is my first post in this forum. Greetings to all members from Spain.
I'm trying to leave my room recording their best to help me with REW. I leave the last measurement waiting if anyone can comment on what looks interesting.
im testing out room eq wizard getting used to it in a live venue i work.
I dont have a measurement mic yet so im using a condensor with a fairly flat response until i get one so maybe this could be the issue,but i suspect that its something im doing wrong.
baiscally the only filter...
I measured my studio with the Mic ECM8000 via REW. Now I have a measurement stored in a *.mdat-file but don't know how to read it! I've uploaded the file to my dropbox.
Is there anyone who cloud say to me what I should change...
A friend just picked up a Klipsch KW-120-THX woofer for a steal. Unfortunately TS parameterss for this woofer haven't been easy to come by on the net. I can't seem to find box dimensions either.
Do any of you guys have any of this info or know of someone in the DC area with a test rig to...
Help: My first REW measurement
First, thanks everyone on this forum for their contribution.
Fronts: DIY groups 1099 left and right
Sub: SVS PB1000 and BIC F12 placed below left and right speakers
I just finished setting up REW with my Umik-1 mic following AustinJerry's...
The AES journal has a very interesting (and lengthy) article this month by Floyd Toole on measuring and calibrating many kinds of audio system, worth a read - it should be free to download without registration or payment: The measurement and calibration of sound reproducing systems
I'm new to this forum and room equalization. So a "Hello" to all! ;)
My first question is which microphone type to use?
The pre-amp is a Behringer Firepower FCA610 USB-Audio interface with two TRS/XLR microphone inputs (+48V phantom power) connected to an Ubuntu 15.04 (Linux) machine. On...
When I'm trying to calibrate I get the below odd results. I'm using a USB M-Audio Mobile Pre with a 100ohm 0.1% resistor in a jig I recently put together. I've got the headphone output running through the jig in the calibration setting to the M-Audio 3.5mm input. I have to turn the input down...
Hello everyone, I was hoping somebody might be able to shed some light on this topic. I am a custom car audio installer by trade, over the past couple years I have found a way to make my job exciting and "new" again. REW has played a significant roll in this newfound excitement. I've discovered...
I've been using REW for some time now, and I noticed something about how it works which I wanted to ask the forum about.
Specifically, the question has to do with measurement sweeps and the range we set.
I noticed that when I set a range for a measurement sweep, the results at the start...
first of all thanks to all to all the people that keep that Forum going... Quite awesome...
I did a room measurement (Equipment: Behringer ECM 8000 no cal, Apollo Twin calibrated, through Dynaudio Bm5 mk 2 Full Range and a probably tiny room). Anyone who could help me to interprete...
I measured the light hitting my potential screen position with my windows open (measured in direction of proposed projector position) and get a consistent 5 lux.
5 lux = .46 footcandles
5 lux = .47 footlamberts
My proposed usage is an Epson 3050 from 11.5ft onto 100" diagonal.
Something I don't quite understand is why I'm getting such significantly different measurment result with the different sweep length, I expected these to be similair. I thought it might have had something to do with the impulse time due to room accoustics, so I shortend this but with little...
I just completed my first REW measurement yesterday and would like to ask for advice on how to improve the acoustic performance of my room.
Some background: the room is 10Wx17Lx8H with the middle of the right wall open to living room (no door). My MLP is 6" from the back, which is a window...