Search Results for ‘measurments’

Hey All, I just tested my room with my new Umik I bought. Now It seems the room is pretty bad in the sub 200hz department.. I read the guide but I only went to 20K on the one graph. I can make new measurements tomorrow probally for now I will post what I have and see what the experts have to...

Hello I am happy to be part of the home theater shack. Joined a little while ago. Using a UMIK 1 for REW .Version 5.1 When clicking run measurement .The display pops up microphone not detected. Using an active usb cable .Wondering who has REW with this issue. My DTS X /ATMOS Reciever DENON is...

I took some measurements after I thought I was good and dialed in and after I ran Audyssey, my response was very good. That was a month ago. I have made no changes, so I ran again today and now I have dip at around 80hz. What could be happening. Btw, I have 2 PA-120s and a FullMarty Sub with...

Finally, I took the first measurements of my speaker and subs, but don't know what they mean. Kindly, please advise what they mean, what are the flaws and is there a way to address them. Thanks in advance all the kind support.

Hey guys, My first post so be kind :) I'm just starting out with REW and taking measurements you can view my Mdat File at this link. I can also attach graphs if you prefer but as you know there is alot more detail in these files. I'm using UMIK-1, all measurements have notes and graph names...

Hi, I finally managed to perform the attached measurements for my living room system. Can you please advice what to look for from the attached graphs ? As a first step, I am thinking to install bass traps in the corners behind the speakers and some absorption behind the listening position...

Hello and thank you for all the great things this forum and the REW developers / tutors do. Amazing stuff! So I am new to this program and running associated test measurements. I do have a background in audio engineering (new school audio engineering, I record and mix music for a living). When...

Hi all I have a phase shift at 1K in all my measurements no matter what driver is measured. Can anyone help me with this?

Sorry for double thread, I'm that worried :sweat: (I should have posted these pics right from the start, meh) Here's a pic of the control room. I treated early reflections with 4" thick acoustic foam. The booth is actually just divided by some big thick fabric, so not much of reflections from...

2X JL audio 13W3V3-4. 1 closed. 1 bandpass. 2x Hypex DS4 1x Berhinger 1124.

Hello people, I think I set up REW correctly iwth an uncaliberated ECM8000 and a tascam interface. I just ran my first set of measurements - which I attach. What do you see here? How shoudl I progress? did I even do these correctly? The HT system is 5 B&W M-1 satellites and a B&W ASW610...

Using the multiple sweep method for measuring makes it kind of more accurate. But if one of those is totaly wrong, you get a wrong (averaged) graph also. What I'm doing is making 5-6 single measurments, overlaying them, and choose 2-3 graphs that are similar. Now I can average those, BUT I...

Everything is setup and working. Here is my first measurement with both subs calibrated to 75 db. Does the graph look OK to go or will the 1124 help to equalize? Suggestions Please! Crossover is at 100hz. I included a graph with both subwoofers and my L and R speakers, to me the crossover...

Does anyone know the cutout diameter of the 4" Precision Ports. I have some on order and I'm trying to get ahead in the build. Also what is the OD of the tube? THanks so much. Sorry for the dumb question.

Black = before auto eq Rd = after auto eq Sub: Velodyne In Ceiling 12" subwoofer with auto eq. I was surprised to see a half-way decent before graph...and also suprised to see little change after the 7-band auto eq.

Here are my 1st measurments for my dual RL-p15" sonosubs. I missed the post on posting graphs, until now, I'll correct the graph later if it is wrong. Here is the uncorrected