Home Theater Forum and Systems banner

menu

  1. System Setup and Connection
    Page 10 of my vintage Yamaha HTR 5830 User Manual shows the connection of an external video monitor to the Monitor Out socket. I understood that this would enable display of the OSD setup menu, but I cannot get it to work. Please help: how to display the setup menu on any monitor, as truly the...
  2. Blu-ray | DVD | Disc Media Players
    Dear experts, I've just started to play my BD with VLC on mac mini, since it's zone free. I'm using an I/O external USB player and the mini is a mid 2011, osx 10.12.1, 8gb 1333 ram, and it's used only as media player, so no data inside Everything is running smoothly (DTS & Dolby recognized...
  3. REW Forum
    Would it be possible to have a smoothing indication tickmark in the Graph drop down menu? You can see this information on graph legend but when choosing smoothing this is unconviently quite far away. Even two different smoothings could be chosen for comparison! I use this quit a lot by opening...
  4. HDTV | Video Displays | Processors
    Hello, New to the forums here Well i have a problem with my samsung dlp did something stupid that i shouldnt done I got curious and was poking around the service menu. And you guessed it I changed something I shouldn't have In the service menu I switched the Lamp Sync setting from "pulse(P)"...
  5. Computers | HTPC | Media Servers
    I currently have about 12 Terabyte's of movie's. I currently have a Word document which I print off, then my friends find a movie to watch. Is there a program/database I can use with my P.C. that will show the name of the movie along with a picture? Something I can update when I store movies...
  6. Home Theater Receivers | Processors | Amps
    hi - I use to be able to go into the Integra setup menu and VISUALLY see the settings and make adjustments from my TV screen but after my installer adjusted the audio/HDTV channel switching delay & clicking sound when changing channels, this isn't possible anymore - its frustrating because I...
  7. Blu-ray | DVD | Disc Media Players
    One of the things I find really annoying is popping in a blu ray and having the "menu button" become non-functional... forcing me to skip (or in some cases only FFWD) through a bunch of previews. Is there any trick to skipping right to a disc menu?:ponder:
  8. HDTV | Video Displays | Processors
    I've got a couple of Samsung plasmas which, being US models, are limited to NTSC and 24fps framerates, whereas the European equivalents support NTSC, 24fps as well as PAL framerates. Since I moved from the UK I've got a small portion of my collection in PAL (mostly TV stuff that was originally...
  9. Home Theater Projectors
    Hi, I have the optoma jd 700x, I have it hooked up to a ceiling mount, but the image it not straight. I tried to keystone it but It does not seem to work when I go into menu their is not all the settings their such as keystone. Please help me! Would be much appreciated thank you!
  10. System Setup and Connection
    Hi, I have the optoma jd 700x, I have it hooked up to a ceiling mount, but the image it not straight. I tried to keystone it but It does not seem to work when I go into menu their is not all the settings their such as keystone. Please help me! Would be much appreciated thank you!
  11. REW Forum
    I'm attempting to use REW with a Wallin Jig v2 to measure the thiele/small parameters of drivers and have run into a strange issue. After I perform my free-air and added-mass impedance measurements all of the options under the "Tools" menu are disabled (greyed out) which makes it impossible to...
  12. Blu-ray | DVD | Disc Media Players
    whats the best audio setup in the menu selections for the panasonic bdp 210 connected via hdmi to a onkyo tx-nr 709
  13. Video Calibration
    I have a new Sony KDL-32M4000 I am trying to calibrate with Calman 4. I have been able to get into the service menu successfully, but cannot for the life of me figure out how to adjust the settings. I need to access the settings next to the #7, which is the control for the gray balance. I have...
  14. Mitsubishi
    Last year my Mitsubishi WS-65857 worked OK. But now, No video image (blue screen), distorted captions (vol, input, etc) and no menu. Sound is OK, and Diagnostic code 1-2 Detect correct input source resolution 1080i , 480p , but not picture. I replace Convergence IC ( IC8C01 Sanyo STK392-570...
  15. Home Theater Projectors
    Hi everyone, I have an Optoma HD70 projector, which I purchased to replace an HD35 with a bad board. I am having difficulty accessing the display menu opotions for Vertical and Horizontal Shift. The menus for the HD35 and HD70 are exactly the same, but on the HD70 a number of the menu options...
  16. Akai
    Akai TVs — Service Menu Access Codes Akai TVs Turn the power on. Press the {MENU} {8} {2} {0} {2} buttons. The Service Menu displayed. To exit, turn the power off. ======================================================= Turn the power off. Press the {MUTE} {1}...
  17. Panasonic / Technics
    Under Construction Panasonic LCDs/CRTs/RPTVs Hold down the {VOL -} button ON THE TV. Press the {RECALL} button 3 times on the remote. The Service Menu will be displayed. Use {1} {2} on remote to navigate main menu items. Use {3} {4} on remote to navigate sub-menu items. Use...
  18. Toshiba
    I just replaced two STK 392-110 chips in Toshiba 50H72 and it fixed the problem. I'd like to know what would be the best way to adjust convergence in service menu. Do all the lines must be perpendicular and square in convergence menu? Would it be a good idea to use Laser level to get all the...
  19. Philips / Magnavox
    I was given a Philips 46pp930217 for free. The tv had bad coolant and a convergence problem. The tv is only 5 yrs old so I decided to put the work and parts in. I did the all the repairs, including soldering all the pins in the stk IC. Problem is now no letting will show up on the screen. I...
  20. Sony
    I have a Sony KF-60DX100 that has been working flawless for years now but just last night while watching a blu-ray the menu box on the TV started to pop up on the screen all the time, I hit the menu button on the remote and it goes away only to return again and again. Some time it stays gone...
Top