Home Theater Forum and Systems banner

mitsu

  1. Mitsu 42315 RED Conv repair

    Mitsubishi
    Hello, I have read the first 10 posts, and I have experience with convergence on this set. I have a Mitsubishi WT42315. The SDK's failed 20 months ago. I replaced them and a PICO fuse. The set worked till now. RED will not adjust LEFT or RIGHT. RED adjust UP and DOWN OK. The RED image is...
  2. Need Help with Mitsu ws-55511 will not stay on

    DIY Repair and Maintenance
    I have a Mitsubishi WS-55511 model that turns on, then turns off within 2-3 seconds. I have read alot of post's on the net about this problem, but I dont know how to check certain componets that I need to. I have the v21 service manual for it, but it does not tell you how to diag. I do have an...
  3. Mitsu WS-65809 blue tint to picture

    Mitsubishi
    I rescued this set from going to the local dump. I have another, a 65311, and thought I could use this for parts until I got it home and realized it was different (it was 1 am, couldn't see model numbers, lol). However, it does fire up, and has a crisp picture. It worked great for about a week...
  4. Need connection information on Mitsu ws55805

    Mitsubishi
    Trying to replace a mitsu ws55805 projection tv with a samsung pn50b450b1dxza 52" plasma. I have the manual for the samsung, but the mitsu site says 'model not found', even though it shows up on other searches. I am hoping the connections match up so I can just move the cables over. Wishful...
  5. Which one: mitsu 4000 or epson 8350

    Home Theater Projectors
    I'm trying to decide which one to go with. The price points are the same, and both stores offer the 92" motorized tab tensioned screen for roughly the same price, so it boils down to the projector. Any thoughts as to which one is the better machine?
  6. Problem With a Mitsu WS-55819

    Mitsubishi
    Hi, I'm a new to this forum, but you guys sound like you know what you are doing. I'm trying to figure out what is exactly wrong with my father in-law's Mitsu WS-55819 projection TV. The problem started when someone was switching through the inputs and then the TV just went blank. I started...
  7. Bad Convergence ic ? Mitsu TV

    Mitsubishi
    Have a Mitsu WS-55807. Had Convergence problem for a number of months. Always intermittent and most times went away after 2-4 minutes. Did some research and ordered the two ic STK392-570 on eBay which came identified as Mitsu parts. Health issues for past few months prevented me getting to...
  8. Mitsu 6500

    Home Theater System Recommendations
    I can buy a Mitsubishi demo from a retailer with a 4yr warr. (incl. bulb if needed) for $1,900. out the door with approx 1500. hrs on it. Or, I am thinking of the Epson 8100 for $150. less new. Any thoughts? It will be a living room movie, game, sports unit that I hope to use outdoors for Monday...
  9. Mitsu ws-65857 convergence issues -Help

    Mitsubishi
    I am a new member and have an issue with issue with my Mitsubishi ws-65857 projection TV. I've read many of the threads and from what I've read it sounds like I may have some cracked solders on my "convergence circuits"(?). Essentially when I first turn the TV on the 3 picture screen colors...
  10. Mitsu VS-55707

    Mitsubishi
    I was lucky enough to be given a Mitsu VS-55707 by a VERY frustrated owner. The set would work beautifully for minutes or weeks and then suddenly shut off. Tries at turning it back on again only resulted in the fist-pounding two second turn off. The first things I did were fairly standard...
  11. Mitsu WT42311

    Mitsubishi
    My nearly 7 year old 42311 loses picture for an hour up to a few days but the audio keeps working. The video will abruptly return and be fine until it disappears again. The convergence chips have been replaced twice-once under warranty during it's first year and again in the Spring of 2007. I am...
  12. Continued grainy and shadowing on Mitsu WS-65909

    Mitsubishi
    Follow-on thread for WS-65909 Manuf date 05/02. OK...I set sharpness way down below 50%, but now I see mild shadowing on a HDNet channel. Not same sharp picture I had before the convergence IC rip/replace. I used auto-reset for convergence, and then maually set red/blue. Still mild shadow and...
  13. Mitsu WD-65734 Issues, pinks in whites and strobing light

    Mitsubishi
    Hey Mitsubishi TV owners, I bought this set new in November 2007 from my local store. It was a nice picture when new. few months into owning it it developed vertical lines, it was barely viewable! Called in to the CS at the store and they got me a service company to come in, he came in and...
  14. Mitsu - 46809 - Sync/Geometry Issue

    Mitsubishi
    I'm having a problem with my Mitsubishi 46809. The below picture shows the issue. I won't even try to describe it as the picture shows the issue. I do not know if this is a sync issue or something else. Here is the normal view: The issue started about two weeks ago and last weekend we...
  15. need help with older mitsu rp calibration

    Mitsubishi
    I have an older mitsubishi ws-65905 (built in 2000) 65" rp unit (an early HD set) the blue tube went south on me (our of alignment on the left side of the screen - regular calibration command don't get a response)and I can't seem to get it back - a good kick on the side of the unit used to put...
  16. Mitsu WT-46805 convergence issue: How to remove circuit board...?

    Mitsubishi
    i have a WT-46805 mitsubishi 46" RPTV i had the convergence issue for a short time and then my TV simply stopped turning on. i diagnosed the error using the menu/input method and got a 2 - 2 error. after researching online i found that the standard cause for this error would be one or both pico...
  17. Mitsu WS-65907 Help

    Mitsubishi
    Greetings All- I hope that I am in the right place to post this. If not, please accept my apologies. I have acquired a Mitsu WS-65907 that was made in 10/2000. This set was passed along from a relative that had it hooked to a HD system and worked fine the night prior to the problem that I am...
  18. Questions about my old Mitsu.

    AV Home Theater
    I have an old Mitsu WS 55807. It is 8 yrs old,but, works very good. It has 3 "S" connections and (480p) (480i) (1080i) component video inputs. It does not have a HDMI connection. My question is will the Dish High Def unit work with this TV ? Will it be a noticeable?Is HDMI that much better...
  19. Mitsu convergence question...

    Mitsubishi
    Hi, I have 2 quick questions for you. 1.) I have a Mitsu WS-65807 s/n 112297. I had the bowtie effect 6 months ago and found the lead on the STK392-570 came off the chip itself. I attempted to tack it back on the chip, and resoldered all the connections on the board for both chips. Now the...
  20. Mitsu WS-65907 converg unit questn

    Mitsubishi
    Mitsu WS-65857 106624 converg unit questn I have a WS-65857 106624 bought in 2002. Currently I am getting red and green shadows. I do the converge and the vertical red and blue line do not move when I hit the adjust. Based on what little I know I think it is a Convergence Module or something...
Top