Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. REW Forum
    I tried to make measurement using allen heath qu 32, as audio card, but i could set it in REW as cards but could not hear any sound in output and input.
  2. New Member Introductions
    I need some advice and input from somebody who has much more expereince than I do. I would like to be able to mix dvd concerts on my home theater system. I know if I had a mixing board i could fine tune some of the poorly sounding dvd's I have....let me know what you think....Thanks
  3. Pro Audio
    Hi, I am new to the audio world and having a problem connecting the equipment. I am trying to connect my laptop via 3.5mm jack to my audio mixer which has a RCA input. The mixer i have is a Yamaha MG10. I am connecting with a 3.5mm to RCA cable. The problem is that when I play the audio on...
  4. REW Forum
    Hello, To make some measurements, my mic will be connected to a mixer (to use the phantom power). When calibrating the soundcard, should I follow the instructions in the manual (ie : connecting the soundcard line input to the line output) or should I include the mixer in the path (soundcard to...
  5. REW Forum
    i recently purchased a Yamaha MG206C usb mixer. could i use that to connect REW to my laptop. using it as a usb interface? thanks
  6. System Setup and Connection
    So today I hooked up four Polk Audio RC85i in-wall speakers to a QCS GX3 amp and a Xenyx 802 mixer. I'm running my dvd audio to the mixer via rca to 1/4 plugs. And the mixer is running 1/4 to rca cable to the amp I think I have everything hooked up correctly, but I can't get any sound from my...
  7. SPL Meters | Mic's | Calibration | Sound Cards
    Well, I'm new to REW and calibrating...so I have a few hardware questions. I plan on buying the EMM-6 Mic. I am aware that it needs phantom power. So I have a Mackie CR-1604 Mixer. I read the manual and it says it's capable from 20Hz to 20kHz (seems good enough to me). Then I would in theory...
  8. AV Home Theater
    Guys: I'm looking for a digital mixer (no more than 4 or 6 inputs) that is capable to produce output in WAV format that could be saved to disk (computer) or flash drive. Any brand name/model suggestion is welcomed, but since it will be for home use, it should be affordable ($$wise). Thanks for...
  9. SPL Meters | Mic's | Calibration | Sound Cards
    Hi, I'm starting out on REW and my Creative surround mixer wasn't firing up. I uninstalled it, before I realised how difficult it would be to find somewhere to download it again. Can anyone help? I've spent ages looking, and it doesn't seem to be had for love nor money..
  10. REW Forum
    Hi, just starting out on the odyssey of REW, and have a few issues. 1) having trouble getting yellow bars on the BFD. Have cranked up sub level on both receiver and DVD trim, but still just green, and that can't be right. I have an SVS SB12 Plus. I'm using the trailer for Master & Commander run...
  11. SPL Meters | Mic's | Calibration | Sound Cards
    Planning to buy: UCA202 Xenyx 502 EMM-6 I read that the mixer should be in the loop when calibrating the sound card. Question is, how do I do the loop? #1 or #2 I would think its #1... Also, what is a cheap mic stand for measuring?
  12. SPL Meters | Mic's | Calibration | Sound Cards
    Bless You Please delete the account. Buy new adapter... Solved..
  13. System Setup and Connection
    I just purchased a new Onkyo TX-NR809 receiver. I would like to hook it up to my existing Bose Acousticmass 10 speaker system and 2 JBL Northridge series ND310 tower speakers, and a DSP-8 Phoenix mixer, a DVD-player, a HD TV so that I can have a Karaoke system. Do you know if all components will...
  14. REW Forum
    Hi! I just used REQ to measure my dj mixer. I did it with the soundcard measuring utility and got this graph: Would you say the frequency curve of the mixer (it was the line input) is ok?
  15. System Setup and Connection
    Greetings everyone! Im planning to buy a behringer-1202 or behringer-802 model, similar to the one posted here: http://www.hometheatershack.com/forums/system-setup-connection/21044-microphone-behringer-1202-a.html I was advice to hook microphones to the mixer and from the Main Out section plug...
  16. Pro Audio
    I just bought a second-hand Yamaha 01v mixer, and I would like to build a case for it. I've got the rack ears and a pair of 12U rack rails. I've built my own rack cases before, but never for a mixer, so I'm just wanting to see what ideas others have for building a slant-top rack case for a...
  17. SPL Meters | Mic's | Calibration | Sound Cards
    Has anyone had any luck using a USB mixer rather than a USB sound card for REW? Looking to use something like this with my laptop to take measurements using REW and a ECM8000. http://www.tascam.com/products/m-164uf.html or am I :coocoo:
  18. System Setup and Connection
    Hi. This is a bit of an unusual setup, so im not sure how this is going to work together. I need a system for an event that uses a 7.1 ORB Audio setup. I also need a mixer capable of having around 3 inputs, inclindg microphone, laptop and dvd player. I need to be able to fad in these inputs...
  19. Classifieds - Equalization & Calibration Equipment
    Behringer Xenyx 802 & UCA202 Soundcard SOLD SOLD Selling a setup I used for REW on my Mac. Everything works perfect and both units basically look brand new. I'm including (2) 1/4" to RCA adapters for connecting the output of the mixer to the soundcard. The 802 has mic preamps built into it...
  20. System Setup and Connection
    Hi everyone, This is my first ever post here. Forgive me if anyone has ever answered my question. Now I am trying to set up a Karaoke system like the attachment. The confusion comes from the connection between yamaha mixer and onkyo receiver. Yamaha mixer has stereo TRS output(L and R) in...
1-20 of 24 Results