Home Theater Forum and Systems banner
modification
1-9 of 10 Results
  1. Home Theater Seating and Accessories
    I have some Lane model 103 theater seats with electric recline. They don't quite recline as far as I would like. Has anyone had this problem or desire to get a little more recline action, and done something about it? I haven't even looked - thought I would ask while in limbo.
  2. DIY Speakers
    I've been in contact with a guy that sells crossover modifications (and DIY mod kits) for Polk Audio RTiA speakers... which I own. The modification quotes he's given to me (for my L, C, and R speakers) are roughly equivalent to the original cost of those three speakers: $1100. I've questioned...
  3. Home Audio Speakers
    This my old set of Jamo Studio 170 speakers, but after upgrading from stereo amplifier to 5.1 and option on new Onkyo TX-SR605 receiver to run bi-wiring front speakers decided to modify my old speakers: First modification port moved from back panel on to front panel by doing this i can move...
  4. Home Audio Speakers
    I installed 3/8's inch rubber weather strip around baffle opening to seperate driver from touching the enclosure and also around inside of opening in case basket of drivers touched the enclosure as well. Immediate difference and I could tell it needed to be recalibrated using my Yamaha YPAO. I...
  5. DIY Subwoofers - General Discussion
    I have a 15" Dayton sealed sub as part of my 2ch, it is 189L 22x22x30 enclosure powered by 600w, and I was looking at trying to get it to go a little lower so I modeled it with a PR-18 passive radiator and it sure looks to me like it models up real good. Could someone verify my my findings and...
  6. Pro Audio
    Hi all, I recently bought a modified Boss SD-1. It has been mod'ed to match the specs of the original Ibanez TS808. I think the sound is very good... made a small audio test/review. Hope you like it! Cheers, Marco
  7. DIY Subwoofers - General Discussion
    I purchased a Micro Ti 5.1 speaker system from Dubai with the Tr-1 Subwoofer. I would like to use this in the Toyota Innova car in India. I note that the power supply to the sub woofer is 230 V. If someone has done this before. Can I find a point within the power supply unit wherein I may be...
  8. Sealed Subwoofer Build Projects
    I currently have a single Mal-X in a 24'' cube powered by a single EP2500. I seem to be running out of headroom and I believe this is because of my amp. I originally thought this setup would quinch my thirst for a small 14x12 room, but unfortunately it isn't. I thought about buying a better...
  9. SPL Meters | Mic's | Calibration | Sound Cards
    I was just searching around google and stumbled upon this According to the tests done, the mod gives the RS meter a very accurate reading all the way up to 20khz!!! Now I just have to find a RS meter....
1-9 of 10 Results
Top