Home Theater Forum and Systems banner
mounted
1-18 of 27 Results
  1. System Setup and Connection
    - My power outlet is all way down to the floor - My TV is mounted on the wall - I want to hang a surge protector on the wall, right behind my TV - That way, I can easily hide the TV and Cable box power cables and connect them to the surge protector. - I want to connect an extension cable in my...
  2. Home Theater Projectors
    I'm an educator who also happens to have a wonderful home theater. The PJ here at work is giving the maintenance guys fits. The colors don't align at all. Not pixels mind you, but inches off with about a 10 foot throw. Thick yellow bands on the outside, then green etc. Looks funky. Ceiling...
  3. Home Theater Projectors
    Hi everyone, Is it necessary to cover a ceiling mounted projector when it's off to protect it from dust? I had a wall mounted one (180cm high approx) and the motherboard died as a result of too much dust - at least that's what the repair guy said. Some people say dust settles and won't affect...
  4. Remotes | Cables | Accessories | Tweaks
    I want to mount a 65-70inch display on a wall above a fireplace (I know that it is generally not recommended). The room is large and the wall is about 9-14ft from the sofa. 1. Can anyone recommend an articulating arm that would be able to support a display of this size and also be easy to move...
  5. Remotes | Cables | Accessories | Tweaks
    I want to mount a large display (65-70inches) on a wall and I'd like to somehow mount an AppleTV and a DirecTV mini receiver behind the TV so I do not need to have shelves. 1. Can anyone recommend some type of flat surge protector that I can plug the TV into that will also provide the...
  6. System Setup and Connection
    Could anyone recommend a good projector mount for the Epson 5020 so it can be mounted to a floor joist? Thanks, Scott
  7. Remotes | Cables | Accessories | Tweaks
    Does anyone know if this is any good? http://www.displays2go.com/Product.aspx?ID=14545 I want to use my existing TV cabinet although mount the plasma on a stand. then have the TV cabinet cover the bottom of the stand. I think i could slide the legs in the bottom as it is open about 3 inches
  8. AV Home Theater
    Hi All Just got a new Denon 4311CI. Tried some front wides yesterday: amazing. Can't believe the difference. Keen to try front heights BUT no where to put them. I came up with a crazy idea. i have two rear channel speakers mounted above my window at rear of room. As there's virtually no 7.1...
  9. System Setup and Connection
    I leveled a laser pointer in the middle of my screen, and tilted the screen down until the beam was around eye level. Was this a good move, bad move, or doesn't really matter? It's a 60" LED LCD, and the middle of the screen is about 5' from the floor.
  10. System Setup and Connection
    Hi I have a small bedroom set up with 3 k5s and 2 k4s, i just wanted to know if anyone had ever used these small speakers and if they worked better with a bit of toe in? My room is about 10ft wide and 13ft long, i would have a play around myself but i have just got out of hospital and cant walk...
  11. DIY Subwoofers - General Discussion
    Hello Folks, I would measure the Thiele & Small paramenters of my Behringer B1800D-PRO subwoofer without dismounting it. Because the unit is brand new (under warranty) and because it is a 18" woofer that is anyway hard to handle, I would first try to measure the T/S paramenters leaving all in...
  12. DIY Speakers
    I'm interested in building an inexpensive kit for speakers that will be used either as rear surrounds or height or width effects speakers. My current front speakers are ACI Sapphires and Protege center (ScanSpeak silk dome tweeters and Revelator midrange drivers). I don't need to use the same...
  13. Home Audio Acoustics
    I've been trying to come up with a plan for ceiling/wall corner mounted bass traps, being that the vertical corners of my living room are unavailable. To clarify, they would be mounted horizontally at the ceiling/wall intersection. I'd like to use a locally available "Safing" insulation (4pcf...
  14. Home Theater Design and Construction
    Hi all, My theatre is almost complete so my question may be moot? I am building all of the speakers myself. The speakers are all in wall type. All the speakers are 3-way. But the front left and right have two 10" subwoofers built into them, each (4 subs total) mounted sub/midrange/tweeter/mid...
  15. Home Theater Projectors
    This might be a stupid question, but I'm a newb so I bear with me... I'm starting in the very initial phases of a dedicated theater room and I want to start with a 3D projector as my 55" Sammy is just too small to really enjoy 3D. It got me hooked but now I want something "real". Since these...
  16. Remotes | Cables | Accessories | Tweaks
    I was looking at this, and it would almost work, but they didn't leave enough space for cables behind any components. http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082809&p_id=5715&seq=1&format=2 Does anyone know of anything close to this, but a little deeper? 4...
  17. DIY Screens
    So I have the screen mounted on pegboard just like the little video suggests. The question is...Do I mount it to the wall first, then project an image, THEN put on the velvet tape? Or... Do I mark off a 16:9 rectangle (8x4.5) on the screen THEN velvet tape it and then hang it? If you've done...
  18. Classifieds - Speakers and Subwoofers
    "Sold" Exodus Mal-X 18" Gen II like new mounted never played Sold Sold Sold This is the last of my Exodus Mal-X 18" Gen II subs. Its in like new condition it was mounted but never played. Asking $375 plus shipping from 70461. Check out my feedback on Ebay under the same name. Email me at...
1-18 of 27 Results
Top