Search Results for ‘mounting’

To mount above the mantel or not to mount above the mantel? That is the question, right? Ok, I’ll admit it isn’t a point of ultimate importance, but it is (at the very least) one fairly common question that’s haunted flat screen buyers over the last decade. Traditional rigid and tilting...

Well, last night I ordered 4 Klipsch rb-51 II's for my Atmos height channels. I'm thinking I'd like to mount them high on the side walls near the ceiling. Does anyone have recommendations? I'd prefer something that swivels so I can aim them.

Currently have RC-52 Klipsch center and may go to the RC-62 as the RF-52's have been moved to the side surrounds and replaced with RF-62s up front. Using 7.1. The current TV is a 51" Hitachi cathode ray projection that is about 12 - 14 years old. When it dies or sooner it will be replaced...

Here is a ten step guide for making cheap 2" thick fiberglass broadband absorbers with a 2" air gap from materials easily available in Thailand. At the bottom of the post are guidelines for using panels as ceiling clouds and for installation in front of windows or other obstructions that can't...

Hey guys. This is a shot in the dark but does anyone know how to mount psi car audio 18" passive radiators? The reason I ask is because the rubber gasket that is used has mounting holes that are smaller then the holes in the actual basket assembly. I feel that there should be an insert of some...

Does anyone know the exact bolt size for a Sammy 55" to mount to a wall bracket? It is metric.

Hi all, I am trying to find mounting posts for a Boston Acoustic VS 325C. I have the wall mount bracket I just don't have the posts (that hold it to the speaker) and I can't seem to get anything to thread into the mounting ports. I remember not having them, in the box, when I first got the...

Hi all. I,ve been searching on the best way to mount my Dayton um15. I cant seem to find specifics on screws, baffle thickness etc. I have seen some elaborate ( expensive) tecniques but no real general advice for mounting. So far my enclosure design will have a single layer of 18mm mdf for the...

So I have a pair of Bose 141 speaker that I have as surround sound speakers but are placed next to my FRONt speakers or towers. I have them there because there is no mount on them so im not able to get the full surround sound experience from hem. I was wondering if anyone has some great cost...

Anyone have any advice for hanging DIY acoustical panels to hollow core doors? I have 5 doors in my dedicated home theater, with two of those doors being solid core doors that are sealed well because they lead to attic space but the other 3 are interior doors that are hollow. Two of those...

Hi everyone, I realize my ceiling beams are too thin to receive the 4 screws necessary to attach my ceiling mount. The only way would be, not to install it so that the square of the mount basis be parallel to the projection screen, but rather diagonally with an angle of 45 degrees (so that one...

I am a little confused and need some help. My intent was to paint a BOC screen. My understanding is that the paint needs to be applied after it is stretched so it won't crack. That's where I'm at right now. I read somewhere in the past that you should roll the first coat or fuzz will come up...

If you are interested in having your rack ears on your Behringer products milled down to look like traditional cabinet equipment, our member swatkins can accommodate you. He trimmed back the rack mount ears on my Behringer DEQ2496 and did a really nice job. If you need to keep your rack...

Looking for a pair of rack ears for a Behringer DEQ2496. I believe they will work from a BFD DSP1120, 1124, 2496... or a DCX2496.

I'm going to mount three Andrew Jones Pioneers surrounds (9# each, SP-BS22-LR). I was going to abandon my existing ceiling mounts (similar to Sanus Italia or Peerless Paramounts, so as to avoid putting a wood screw in the speakers. I ordered and received both Pinpoint AM-40's side-clamping...

I have decided to install a LCD tv on the opposite wall of my projector screen..I am wondering if anybody has actually cut the drywall out, to expose the studs for mounting the mount on..I'm just trying to get the TV as flush as possible to the wall..I have a "Slimline" mount, but it looks like...

I finally ordered my sheet of 6mm sintra for my 120" screen from my friends shop for a steal at $66 woot!! I have not yet received it as we just placed the order but I'm curious to how you guys with this kind of screen are mounting it. I have been told I do not need a frame and that I can...