multeq

I have an older Denon AVR-987 which includes support for the original MultEQ (not XT not XT32). I know the newer versions of Audyssey include better support for Subwoofer equalization, but is it safe to assume that MultEQ is ignoring frequencies below 120 Hz? I just introduced a Behringer...

I was kindly asked to ask this question on a separate thread and not the one I first posted it in! so here goes!! Hi guys!! What would be the best way to implement an anti-mode / 8033 cinema if you had either a receiver with multeq xt or multeq xt32 using two diy subs running through one...

Does anyone know what the exact perfect placements for the mic are for a 5.1 placement? I know its at ear level all the time. I have a 2 seat setup like this. 1 is the main sweet spot, where i set when i'm alone Do i do 6 or 8 measurements? Like this: Or this: I want to know the...

Home Theater Shack is proud to announce the most comprehensive user guide to Audyssey MultiEQ on the planet. Written by Wayne Myers (AudiocRaver) and available beginning today, the Audyssey MultEQ FAQ and Setup Guide is designed for both owners and potential owners of AV Receivers with Audyssey...

Audyssey MultEQ FAQ and Setup Guide by Wayne Myers AudiocRaver 1 - Introduction Audyssey MultEQ is a room- and speaker-tuning technology that is built into many Audio-Video Receivers. It is designed to be simple to use with minimal special knowledge, and it is a powerful tool that has...

Discussion Thread for the Home Theater Shack Audyssey MultEQ FAQ and Setup Guide. Audyssey MultEQ is a room- and speaker-tuning technology that is built into many Audio-Video Receivers. It is designed to be simple to use with minimal special knowledge, and it is a powerful tool that has...

Audyssey MultEQ FAQ and Setup Guide by Wayne Myers AudiocRaver 1 - Introduction Audyssey MultEQ is a room- and speaker-tuning technology that is built into many Audio-Video Receivers. It is designed to be simple to use with minimal special knowledge, and it is a powerful tool that has...

Do any of you know how Audyssey will affect the low end response of a sealed sub? Will it flatten things out with boost where needed similar to what a stand alone EQ or a LT circuit would do?

Hello, I just upgraded speakers and have a new AVR on the way based on advice from the forum. My question is about speaker placement. Due to how my room is arranged, I am limited in where I can put the back speakers. We have to sit in the room diagonally, meaning the tv is in one corner and...

Does anyone have a List of Receivers with Audyssey MultEQ XT32 ? or know a couple off the top of your head, link etc? Thanks!

do you realy need to calibrate with spl if you have multeq xt

I currently own a Denon receiver that has Audyssey Multeq on a 5.1 set up. Is it worth upgrading to one that has Multeq XT or even better Multeq XT32? What is the advantage in having the other filters?

I have a Denon AVR-3310 with Audyssey MultEQ. After reading owner's guide and going onto the Denon and Audyssey websites, and I a still confused on whether or what equalization MultEQ does on the LFE channel. So my question is this - if my receiver has MultEQ, do I need to do my own...

Hi all, I've got a feeling this is going to be one of my longer posts so please bare with me... ;) My situation is as follows: some time ago I built a massive 18" sub thx to the great help I got on the forum here. My intention was to place it in a dedicated HT room in our new house, but due to...

I am looking at a couple of different sub plate amps....some utilize PEQ (rythmix, O audio ex.) others do not. I have an Onkyo RC-180 with the Audyssey Multieq is supposed to smooth out the response curves and I'm not sure if having the PEQ option would help or hurt or just be an added...

Im in the process of revamping my home theater equipment for my new house. I purchased a Velodyne sms-1 to eq my subs with my old reciever an Onkyo tx-nr801 that didn't have any eq feature. I just purchase an Onkyo tx-nr1007 with Audyssey MultEQ XT. The SMS-1 is still brand new in the box...

I'm currently using the Onkyo TX-SR506 with 2EQ and like the results however it does nothing with the sub. How much of an improvement will MultEQ bring to the table ? Especially with my subwoofer. My room has a noticeable peak at around 50hz when I run frequency sweeps with my Rives audio disc...

If MultEQ XT were used in the normal way, in essence to smooth and widen the sweet spot – could, or how would the settings it generates then be modified, to compensate for (in my case recently quantified tests by an audiologist) a drop off in hearing above 2 Khz? Either by saving the settings...

Hi Guys, thanks for the welcome. I was wondering if any of you have heard of the Audyssey MultiEQ system for room equalization. Obviously this is my main interest and I know you have the REW so I was wondering if anyone had had a look yet and had any opinions? I know for instance that IK...

This thread will be the discussion thread for Audyssey MultEQ and the graphs posted in the Audyssey Graphs thread. Let's keep the graphs presented in that thread and the comments in this thread. Thanks!