odd

Hi guys I already gleaned a lot of info from this forum and hope to contribute. My room is L shaped with a stair case behind the MLP. Been using the Umik 1 and REW to measure and adjust, but hoping to find more knowledge here on how to perfect things. 9.2 Klipsch Rp280 Rp450c S1 surrounds...

Hi all, im testing out room eq wizard getting used to it in a live venue i work. I dont have a measurement mic yet so im using a condensor with a fairly flat response until i get one so maybe this could be the issue,but i suspect that its something im doing wrong. baiscally the only filter...

Hi guys I'm using Rew since a couple of days. I've a Velleman Avm2050 and a Audyssey Mic the graph below is taken with a Audyssey Mic setup. no problem with my Realtek 887 . I calibrated it without any issue and I've the related cal file I got this kind of odd result the red line is the...

Hi all, First off apologies if this is in the wrong forum, couldn't decide where to put it. Please feel free to move mods if necessary. Currently deciding on which room to move into and one of them looks as follows: The room is effectively split into "2 parts". The majority of the room is...

I was browsing through my local AV store and found these two models as part of a clearance sale. I currently use an Onkyo HTR960 I bought a fair few years ago however I did run into an issue with it where it would take a long time to get any video feed via HDMI to be displayed if at all. After a...

Hey guys, Background, I picked up a UMM-6 from Parts Express and set up REW on my MacBook (running latest OS X 10.9.4). My goal is to use REW to more logically set the filters for my Velodyne SMS-1 and get a nice flat response from 15-80hz with my Seaton SubMs HP+ Master and Slave setup. I...

Hi! First, let me say that I am a happy and experienced user of REW. I mostly use it with a MiniDSP 2x4 to room correct and provide EQ for Bose 901s, currently with a DIY subwoofer. I've come close to EQ-ing to my house curve (another concept I learnt here at HTS). What is odd is the past few...

High guys, While waiting to be set up to perform the first measurements with REW, I am studying my room and trying to locate the first reflection points. As you can see here http://www.hometheatershack.com/gallery/index.php?n=14507, the room is partially open to the sides and the listening...

After hearing about room calibration, I decided to give it a shot, but it seems I'm stuck on the sound card calibration part. For reference, I have a UCA202 DAC/ADC as well as a Motherboard Line-in port. The UCA202 mic input has a noise floor of -60dBFS, while the Mobo is lower, at -85dBFS...

Hi all. While skimming the Internet for some advice I fell upon this site. I was impressed by the level of knowledge here. I've been wanting a dedicated HT room for since before I had kids (now they're teenagers), and now I've decided to go ahead but the only room left available has an odd...

So, what with a number of elements out of my way (stupid work), I am about to re-enter/ re-build my listening lab and start again with this project. Before I begin, though I wonder if y'all might have some advice... Months ago I ran a number of tests (using REW) with different drivers trying to...

http://www.hometheatershack.com/gallery/file.php?n=10234 Title: The Odd Life of Timothy Green Starring: Jennifer Garner, Joel Edgerton, CJ Adams Directed by: Peter Hedges Written by: Peter Hedges, Ahmet Zappa Studio: Monsterfoot Productions Rated: PG Runtime: 105 min Blu-ray Release Date...

Hello fellow shacksters, I have this odd shaped room which I was hoping to do something with in terms of being able to watch movies, tv, etc. with surround sound. For those who followed my intro I have (finally) sourced all the components and have jury rigged it to test it out. It works quite...

This is an odd question so bear with me on this one. I have a Yamaha RX-Z7 (non 3-D) receiver that I purchased early last summer. About 3 months later, Yamaha comes out with Aventage series that is 3D. I currently have a Panasonic Bluray player that has 2 hdmi outputs which still allows hd sound...

I think I've seen similar graphs over time to mine so I am not yet at panic stations. First off, the equipment I am using: Dayton EMM-6 calibrate mic (cal file loaded) Behringer Xenyx 502 Mic stand Yahama RX-V871 (I've run YPAO) After calibrating the sound card, I calibrated (to the best of...

I've just been having a go at doing some full range sweeps, with a view to producing some convolver filters for use in J River. The graphs though look really odd - there's a 25db drop off from 7k to around 250. My speaker should roll off at around 55, so I can only assume I've done something...

I want to buy a system for my apt,it`s 24' long 12' wide with 8' ceiling...It is a living room kitchen combo....Carpeting in living room part linoleum in kitchen...HDTV is in the end wall living room facing the kitchen side opposite wall is cupboards,sink and fridge...I want to buy used around...

Hi, I could do with a bit of advice about the placment for my rear / side speakers on my 5.1 HTPC. As its a small room set up i only have 2 options for my speakers. 1. On floor stands just behind me, the pros are i can move them out the way when needed and i can have each speaker the same...

I reran REW in my room after some minor changes over the last few weeks. Suddenly I have an almost off the chart spike in RT60 at 10k+. Waterfall shows a weird decay. It seems linear, so I'm not thinking a buzz or other equipment problem. What could be causing this? I am using a beta...