Home Theater Forum and Systems banner

on or off

  1. Need Part # Of Amp on/off switch

    DIY Repair and Maintenance
    Hi Guys, I am trying to determine the part Number for the On/Off Switch for my Buttkicker BKA-130 amp. I have the schematic and found the on/off switch in there but the number there does not seem to be associated with any switches I have looked for.. So here is the schematic for the BKA-130...
  2. inuke 1000dsp on/off solution???

    Subwoofer Amps | High Pass Filters
    Hi everybody. I'm looking for solution to automatically power on / off inuke 1000dsp amp with the receiver? Really appreciate any suggestions. Thank you.:dontknow:
  3. Samsung PN51E550 tv Flashing on/off

    HDTV | Video Displays | Processors
    Good Evening, Soooo got home from work turned my tv on and in 5 minute intervals the tv would flash off turn back on flash off again turn back on and would continue about every 5 minutes. Its never done this before I checked the cords, changed the outlet stll doing it
  4. FBQ1000 remote ON/OFF switch and mains hum

    Electronic Processing/Equalization Devices
    I've a FBQ1000 in my home theater installation for the sub. It works fine but since all my equipment is remote controlled except th FBQ, I wanted to use a remote controlled power switch to turn on and off the unit. The FBQ power switch left at the ON position and the remote controlled relay...
  5. Installing auto on/off switch for powered speaker

    Home Audio Speakers
    Hello, I wanted to reach out for some help to some seasoned DIY audio people. I have several 5" Monoprice powered monitors paired up with apple airport express' for a makeshift multi room system. It works perfectly as each book shelf speaker is independently powered for each small room, but...
  6. Auto on/off switch on active speakers

    DIY Audio
    Hello, I wanted to reach out for some help to some seasoned DIY audio people. I have several 5" Monoprice powered monitors paired up with apple airport express' for a makeshift multi room system. It works perfectly as each book shelf speaker is independently powered for each small room, but...
  7. Help controlling subwoofer on/off and levels.

    DIY Subwoofers - General Discussion
    I have a couple of diy subs powered by a Crown XLS 1000 running off of an Onkyo TX-NR709. The Crown has a hard button on/off switch. 90% of the time the family is watching TV and they either don't want the sub on or at least want it turned way down. 10% we want the sub turned on and levels up...
  8. On/Off for subs

    Home Theater Receivers | Processors | Amps
    I own 2 ULW's and 1 UFW and would like to save energy while they aren't being used. I realize it's not much but sitting in standby the majority of the time I figure there is something to be saved. Aside from turning the isobar they are plugged into (which is nearly impossible to reach) does...
Top