Home Theater Forum and Systems banner
onboard
1-8 of 10 Results
  1. New Member Introductions
    Hello Everybody, I was invited to join this great new forum and I'm verry happy to be there with you guys. :) A quick Introduction. Greg WALTER, journalist for the website projection-homecinema.fr I'm writing review about almost all the new home theater projectors (and cross over) that are...
  2. SPL Meters | Mic's | Calibration | Sound Cards
    Hey all, I just ordered a new SVS PB 1000 sub and want to do some testing on it with REW when it arrives. I was wondering if my onboard sound card on my desktop will be good enough. I'm not sure I understand all the jargon, so have copied and pasted the following specs on it: ... Also...
  3. Computers | HTPC | Media Servers
    My mobo has an Nvidia 8200 mGPU onboard with a DVI out, 8GB of DDR2, and a PCI x1 slot. In BIOS, I can allocate up to 512mb of the DDR2 to the GPU. It supports 1920x1024 at 60hz. I was thinking of upgrading this though, but I'm not too knowledgeable of graphics cards. I know PCI x1 is kinda...
  4. Home Theater System Recommendations
    I'm installing a HT in a new paneled den and my better half doesn't want to put holes in the wall or have speakers or wires on the floor, etc. I have looked into a soundbar system, like the Polk 6000, and it's also been suggested that I buy the Artisan speakers that attach directly to the...
  5. REW Forum
    Hi all, First post, tried my best to answer it from the forums but to no avail. Right at the point of giving up with REW. I'm using a laptop with on board Realtek AC97 audio. It has only headphone outputs and microphone inputs but in the audio settings there is a line-in setting which I have...
  6. SPL Meters | Mic's | Calibration | Sound Cards
    I apologise in advance it this has been answered before. My HTPC has a Gigabyte GA-M57SLI-S4 motherboard which offers onboard HD audio. I have been using the digital output to my Dennon receiver without any issues for playback of both music and movies. Should I be able to use the onboard...
  7. REW Forum
    Is REW supposed to work with Soundmax onboard audio line input. I did the first step today and ran the loop back from front sp to line in, the input level was turned all the way up but only got -97db so I connected to the mike input with mike boost on . I forget what it said I think it was...
  8. New Member Introductions
    Hello everyone, i found my way here researching acoustics. Have been reading threads and learning as much as i can. I might be a bit quiet while i learn but i hope i will be able to contribute to the vast amount of knowledge here. Thank you for such a great forum.
1-8 of 10 Results
Top