Search Results for ‘outputs’

I have a Marantz NR1607 AVR and I wonder if anyone knows if I can get two two outputs from one source. I would like to stream from one into my hearing aids and the other would be for my wife to hear the same sound. I have TV Streamer 2 from Resound with mini audio input, Optical (Toslink) and...

So I am a bit confused and I have a huge objective I am trying to meet. So I have a brand new 65" LG smart TV, Comcast cable box(plugged into HDMI 1), an xbox 360 (plugged into HDMI 2), and a Google Chromecast (plugged into HDMI 3[arc]). I plan on buying one of those brand new Smartcast Vizio...

Hi All - this is my first post here and I'd like to solicit your opinions about how to best manage all the eq on my loudspeakers sets. I run all the audio in my home from my mac-mini via HDMI, 2 USBs and Apple TV all going to different amps and speakers. I'd like to apply unique equalization to...

I have car dsp that seems to do weird things with one tweeter channel. I have done lots of readings via sound/mic but would like to see what the input to the amps look like. Thoughts on how to do this? I was thinking just rca to 3.5 into the mic input on laptop (I don't have sound card....usb mic).

If you have 2, 3, 8, 57, etc. drivers on a particular channel, how do you make sure they all match each other's output levels? I'm talking about an active system with one amp channel per driver, or at least one channel per crossover band. Do you size the amps to match the different driver...

Hi Everyone, This is my first post here. I have a Marantz SR 7000, I bought it brand new years back. Here's whats happening. It is connected to my computer through a Soudblaster external sound card as I play most everything though the computer. Since the installation it seems no sound comes...

If you have a Mini DSP with the 2.1 plug in, can you use a "Y" adapter on the input side and multiple "Y" adapters on the output side to create more EQ options for a single subwoofer? I don't know that I would need it, but having more filters could be a good thing. I don't see any reason this...

I currently have 2 PB12-NSD installed in the front of the room just inside the front L & R Mains and 2 PC12-NSD that should arrive in a few days which i will be installing in the rear L & R corners below my L& R Rear surrounds. I figure I will keep them in like pairs on each output. 2 PB12-NSD...

Hello,I am new here and quite green at all of this,I want to use a Inuke1000 to power 2 suwoofers and my question is ,Can I run 1 sub per channel and will both channels do Low pass in,I think I have it worded right.I have more questions but I will do one at a time so I dont get mixed up.Thank...

I asked this as part of a response to to another post on a similar tack. When using HDMI as an output source is it possible to use more than one channel (left+sub, right+sub, all, etc.) in a measurement sweep? If so, how?

The trend seems to be putting dayton 18ho together. The boxes on these are not real large at 21in or 4cubes. The SDX 12 from the kits on the CSS page will go low with a 18in or 2.5cubes. From the data-bass page the LMS-R 12 is only 3DB less across the board than a Dayton 18ho. Wondering what...

I have been trying to set up a new system. It appears that the right channel of the audio from my Comcast AVR is higher than the left. When I play a DVD the system appears balanced. I have compared the outputs using headphones. I can compare the analog outputs with an oscilloscope. How can one...

This is my first post, so I hope I have the correct forum etc. I recently purchased an $2000.00 RX-A3020 receiver (since all of my previous receiver/preamps have not supported video) and I was hoping to get all of the required features. Even those I was unaware of. One "feature" that is not...

I have a Pioneer vsx-305 hooked up to an old pair of cambridge soundworks ensemble ii's that the subwoofer is broken, my friend gave me a passive subwoofer that has only one driver and uses speaker wire terminals instead of an rca jack. In theory it should be possible to plug the one driver into...

Ok...my impluse got the better of me and I just purchased this player .... currently using a BDP-80! This old player was starting to bug me as the disk loaded times were really long. Was just thinking about the dual HDMI outputs, of the 103, and was wondering if, maybe, I should have one HDMI...

Here's a question for convenience. I have successfully downloaded and setup the latest version of REW together with ASIO4ALL and really enjoy the 8 channel configuration. Everything works fine, even AVR displays "Multi CH IN" and all the input indicators on the Denon are lit. Now, in the...

I'm using a USB interface by Native Instruments for REW measurements (it's called the Konnect Six). For convenience so I can easily feed any of my channels I'm using its SPDIF output to feed my Z Sys router, and then I can route it to the digital inputs of all channels of my DACs, as I can route...

Greetings to all. Are there any surround processors that would output the 8 movie channels in a digital format? I'm thinking of getting some miniDSP units and what I'm wondering is if it is possible to have a signal chain something like: DVD Player sends digital signal to Processor, which...

Was wondering if, by running the 1/4" outputs on the BFD, the XLR outs become go quiet or vice versa. Can both run at the same time? THANKS!!:T

Hi, New to this forum and REW in particular, so first question is about gear.. Goal - tuning full-range 3-way speakers for crossover points and EQ. Speakers should be able to reproduce 30-20,000 Hz. Crossover and EQ device is FDS-366T Lets say I'll use EMM-6 mic. What pre-amp would you...