Home Theater Forum and Systems banner

parametric

  1. REW Forum
    I got an XTZ 99W12DSP subwoofer which has 5 parametric EQ filters and 10 graphic EQ filters. For REW, I pick the "Generic Equaliser" and setup 5 Auto PK filters and 10 Manual PK filters with the 10 static frequencies and the Q-value of 5.1. I then run the "match response to target" and then...
  2. Home Theater System Recommendations
    I have been getting into room correction with REW and am trying to decide if I should get a miniDSP for sub EQ, but then I miss EQ on the rest of the system. My current AVR is a yamaha RXV-471. It has a 5 band graphic eq. After playing around with equalizer AOP, there is no substitute for a...
  3. Electronic Processing/Equalization Devices
    Yamaha’s Stunning YDP2006 Digital Parametric Equalizer Back in the summer of 2007, I was ready to call it quits after a year-and-a-half with the ubiquitous Behringer DSP1124 Feedback Destroyer I was using to equalize my subwoofers. It had always been a love/hate relationship with the BFD...
  4. REW Forum
    So, took all my measurements for each speaker, and my sub. Awesome. Ran auto eq as suggested with 1/6 smoothing, and removed any gains less than -3 or +3, ensured no really high q's... so far so good! Working on my sub... STUCK. My Sherbourn PT-7030 only allows for gains of up to +3... Any...
  5. REW Forum
    Hello, first post! I've been reading a lot through this forum, and am looking for some hopefully simple answers. I am about to buy an UMIK-1, as it seems to be the easiest solution. I have a laptop with HDMI out, and would like to eq my room for each of my 7 channels and my subwoofer. Is the...
  6. REW Forum
    I don't have a physical parametric EQ now. Can I use a parametric EQ software with REW to practice room EQ tuning? Which software is recommended? Thank you!
  7. REW Forum
    hi guys, is there away for me to use REW to work with my 32 band graphic EQ and not use the parametric EQ settings? this eq is in my car it gives me 32 bands with -12/+12 db it does not have a Parametric i want to try this out before i buy the mini dsp for my car :)
  8. Audio Processing
    Anybody still using one of these? What unit is it.......:help: Thanx Bill.
  9. REW Forum
    Hey I did a test last weekend pulling out Lyngdorf room correction out of the sound chain at my friends' apartment. Until then we used there REW for measurement only, but this time I also created filters for 'Generic' device and then entered the coefficients into Parametric EQ of J.River...
  10. Audio Processing
    Has anyone tested the new Antimode 2.0 Dual core yet? I have the Antimode 8033 myself, and think it's the best since sliced bread. I've achieved great results with it in several different systems. The new Antimode 2.0 is a full range room correction system, but also features some nice features...
  11. Classifieds - Mobile Audio
    Arc audio peq 7 band parametric equalizer SOLD http://www.ebay.com/itm/200741533034?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 SOLD
  12. REW Forum
    Hey guys! Im new but always visit this forum. I found this forum is very educational. I have few question. Most of the AVR nowadays has in-built Parametric EQ. How is it comparable to the Behringer Feedback Destroyer? Is there anyone here have an experience using the in-built? Thanks.
  13. Classifieds - Equalization & Calibration Equipment
    RANE PE 17 Parametric EQ, 5 band parametric eq, XLR and 1/4" TRS inputs/outputs, mint condition. I'll include 2 free 1/4" TRS to RCA gold plated adapters. Excellent, subwoofer eq. $125 free shipping to US. PAYPAL Only.
  14. Electronic Processing/Equalization Devices
    Is there any way to EQ frequencies lower than 20hz with a BFD? It's been a while since I've used REW, but I just downloaded it again. I believe that you can EQ lower than 20 by selecting a frequency of 20 and then a Bandwidth (BW/60) of 25 to get 11.8hz for example? I know that you need to be...
  15. Classifieds - Equalization & Calibration Equipment
    For sale is a used but in excellent condition Velodyne SMS-1 Subwoofer Parametric EQ System. All accessories, manuals, and original packing material is included! $old. Will ship double boxed!
  16. Electronic Processing/Equalization Devices
    I am just trying to feel out my options here, and looking for a good pre-amp without room EQ and acquiring a potentially superior outboard Room EQ solution seems to be an interesting path. I realize it is more expenssive, and in that vein, would be curious how cost effective it is. I am also...
  17. REW Forum
    Hi; I have been using various programs to design EQ filters over the years including REW WinISD Pro, Crown Audio's IQ for Windows, Aixcoustic's Electri-Q, the UFX plugin (on KX drivers) etc. One thing I have noticed over time is how the Q of Parametric EQ filters varies from program to...
  18. Classifieds - Equalization & Calibration Equipment
    SOLD SOLD SOLD Behringer Ultragain Pro MIC2200 Mic Preamplifier / Line Driver / Parametric EQ / HPF Discrete mic/line input stages with soft mute +48 V phantom power Ultra-wide bandwidth from 2 Hz to 200 kHz for open sound Two fully parametric EQ’s with adjustable center frequency...
  19. Home Theater Receivers | Processors | Amps
    Hello guys, this is my first post here at ht shack after a while of reading of many days. I am one of those who is in search for the holy grail to hi-fi audio but with not much luck so far :-). Been using a RX-V661 for a while with not so good results in audio reproduction. Have been able to get...
  20. Electronic Processing/Equalization Devices
    My current sub placement has 3ft of space from the corner of my room, and is against the front wall. The sub dimensions are 15"x15"x15". After doing several crawl tests with the sub in my main listening position, this produces the best sound. If it is placed in the corner the bass levels are...
Top