Search Results for ‘pass’

I've been playing with REW for a while. I have a pair of speakers and rel strata sub, also a dac and integrated amp. I can only use the high level pass filter with the sub. All the forums seem to talk only about integration of subs with amps that have lpf filters. That isn't practical for me or...

Hi, REW is excellent. I have been using it on my HTPC and Macbook. I have been using REW with a CM6206 front-end (startech ICUSBAUDIO7D). This device exhibits some DC bias in the samples on both the microphone and line inputs. If I examine the scope display and toggle the high-pass filter...

Hey, how are you all? I have a dual 15 inch PA speaker. It sounds great and the bass is great too. But I was thinking that it will be even better if I add a Low Pass Crossover to one of the woofer. This crossover support like 200 RMS. Can I buy two of these and wire them toguether? Or how...

I have a Samsung BD-H6500 Blu-ray player and a Pioneer VSX-322-K AVR but I cannot get the signal to pass through to the TV. Other devices (laptop and Chromecast) work OK. Everything is connected using HDMI cables. I have tried different HDMI cables between the BD player and the AVR and...

I came across someone selling An ONkyo HT-6300 System. Ht-R680 Receiver and i guess it comes with speakers and a sub but mainly my concern is First, Is the whole system For $150 a good deal? Second, Would this Receiver be a good upgrade to my Yamaha Rx-v750? I read a lot of people...

Hi guys i came across someone selling a pair of these Polk Audio Rti100 tower speakers. From what i read researchng, i was gonna go tomorrow and give them a listen and if i like them try to negotiate a deal. I don't really need them, I have a Pair of Boston Acoustic VR1's that serve me just...

I'm studying the possibility of building my own tower speakers using a pair of 4 ohm 8 inch woofers connected in series for 8 ohm load and also a pair of 4 ohm full range speakers for 8 ohm load that should work as mid-range and tweeters. Those drivers are per tower of course. The problem I'm...

The simplest way to put this, is; you know how some subs have the high pass & in/outs to send signal passively to active sub, and then continue on to speakers? Ok, now, is there any way to do that with a Dayton SPA500? It does not have outs or a high pass - so I know I cannot do it directly...

Hi everyone, I am using REW for several months now, and I am slowly improving my measurement and optimization method. Quite time consuming, but when we like it… :innocent: My subject of interest is a 3 voices multi amplified system with a Xilica crossover. I measured each speaker individually...

Hello , I will be running two sealed boxes with JL audio 12W3-3-2 subwoofers, and 1 ported box with a JL audio 12W7-3 when the subwoofer boxes are completed . I will also be post pictures when their done. After a little research and additional information from another home theater shack...

Hey all, I am wondering what you recommend, for my next receiver I want one with 3d and 4k passthrough just in case I need it in the future, but I don't want to spend a lot. What inexpensive(relatively at least) options are out there? I don't mind buying refurbs either. I would hook it up to my...

Recently announced, and available later this month is the AVR-E400, part of Denon's new E-Series Network home theater receiver line up. The E-Series, meant for ease, excitement, entertainment, and experience includes models AVR-E200, AVR-E300, and at the top of the line, the AVR-E400. Video...

Hi, this is Dahai. I'm a new member and also a novice on home theater. I need some help with the latest receiver feature called 3d pass through. Looked at Marantz sr6006 and it is said to be 3d ready; but the latest model sr6007 supports so-called 3d pass through. I did just get a 3d tv...

Hey team, I have searched the internet extensively for an answer without any luck. So I figured it was time to join a Home Theater forum anyway. With the hope that answers could be found to this & future questions, the Shack seemed to be the top option. Thank you in advance! I have a Samsung...

Hey guys I'm having some problems, I have the Onkyo 809, I have been using HDMI pass through with my PS3 so I could play games with the receiver in stanby, this worked fine until today, I get the video but no audio from TV. I swapped out the HDMI cable-no good, I then setup my BD payer for...

I have 2 subs that need equalization, large part of which is a high pass filter. I have been searching the forums and googling, and seen a few, not that many really, options. The reckhorn is a fairly common use for the purpose, but not available readily it seems. Anti-mode seems to be...

I have just installed a vsx-1021-k in my setup. Satellite box and pc are connected via hdmi to thr receiver, The receiver is connected via hdmi to the tv. I entered the setup and specified 'normal' pass thru. I expected that I will keep getting audio and video on the tv, when the receiver is...