Home Theater Forum and Systems banner

pass

  1. Electronic Processing/Equalization Devices
    Hi there, I will be building two slot ported subs tuned to 15hz. I currently have a BFD DSP1100 but am wondering if behringer sell a BFD which has a High pass filter built into it. I know you can get the behringer mic2200 or the reckhorn B1 or B2 (I guess I would need two of these). Wondering...
  2. Subwoofer Amps | High Pass Filters
    Hello my fellow shacksters I have recently been reading alot of threads concerning High Pass and Low pass, i currently have 2 kicker cvr 12's (soon a FI q) running off of a Ep 4000 and i was wondering if i should have the Low pass or high pass on or off i assume High pass = letting high...
  3. Electronic Processing/Equalization Devices
    I want a BFD to equalize my subs but I also want a ssf (15Hz). I would like to get one unit that can do both for me. Any suggestions? Ryan
  4. Electronic Processing/Equalization Devices
    I have been using WinISD to model various designs for a HT sub I am planning to build. When modeling I apply a high pass filter to prevent exceeding max cone excursion at low hz levels. For example, is it possible to apply a 3rd order high pass filter at 14.25hz using the BFD 1124P? If so...
  5. REW Forum
    Okay. once again! Here we go again
  6. Two Channel Audio
    Pass labs, known for making some of the best sounding and very well constructed amplifiers, have come to market with to new preamps. A step up from their X series, with full remote control, these two preamps have a better sound signature than of past Pass Labs amplifiers, according to them...
  7. System Setup and Connection
    My wife uses our 60" Mitsubishi DLP to mainly watch news programming. She does not like to mess with the AVR and listens to the sound from the TV speakers...I m looking to puchase a new AVR with HDMI pass through. My question... Does the AVR need to be ON for the TV to receive audio and video...
  8. Home Theater System Recommendations
    I have researched and read on so much about the Home Theater in Boxes, and thought surely I would get an Onkyo with a DVD player until I found it only had HDMI pass through connection only....so I see so many others I am truly LOST AND DEAD IN MY BRAIN. :unbelievable: I have a new Samsung LCD...
  9. Home Theater Receivers | Processors | Amps
    Hi guys, I had a question about the hdmi pass through on the onkyo 805.The user manual and Onkyo customer support are telling me the 805 does not upscale but, for some reason when I connect my pc through the hdmi input on the 805 it tries to upscale the resolution from 1360x768 to 1920x1080. It...
  10. DIY Subwoofers - General Discussion
    It appears to me when I apply a high pass filter in winISD to prevent over excursion, the group delay increases significantly--is this anything to be concerned with (audible)?? I am looking at a Tempest X in a 380-400 liter enclosure with 1 X 8" port and 500 wpc amp tuning 15-16 Hz I thought...
  11. System Setup and Connection
    Thanks again in advance!!! Since my HT-S894 system is pass thru, does my audio also make the same loop that the video does from DVD? I have HDMI from DVD to AVR and from AVR to TV with optical coming back from TV to AVR. The AVR does recognize the HDMI but could I get better quality audio...
  12. Subwoofer Amps | High Pass Filters
    If not, anyone ever measured the low-end response of the BFD? It's advertised as 20Hz-20kHz at -3 dB, does it roll off significantly below 20 Hz? Thanks!
  13. Electronic Processing/Equalization Devices
    Hello there, I have a question concerning using a BFD as a low pass filter for my sonosub. I have a HK-3485 which gives a full signal subwoofer out and that gets passed to my ep2500 to power my sono sub. Is it possible to get a BFD and add a filter to use it as a low pass at 150hz without using...
  14. Subwoofer Amps | High Pass Filters
    OK, I'll be the one to admit it because I know there must be dozens of us that have NO idea... What exactly do these things do and how are the implemented? Also what's with all the different types in WinISD?:reading:
  15. Manufacturers & Vendors Reference Info Forum
    Pass Laboratories www.passlabs.com 24449 Foresthill Rd P.O. Box 219 Foresthill, CA 95631 530-367-3690 530-367-2193 fax Great info about amp building http://www.passdiy.com/ Forum hosted by http://www.diyaudio.com/ has some great info.
  16. AV Home Theater
    There seems to be some confusion about the ability to transport 7 and 8 channel PCM over HDMI v1.1 and v1.2 using HD-DVD and Blue-ray players. I did some research about the issue and found this paragraph at the HDMI FAQ site The way I read this, all HDMI versions support 8 channel PCM, so the...
  17. REW Forum
    Hello all, Just noodling around with REW today, post NSD driver upgrade on my PB12ISD/2. I ahd a few issues with REW getting a good input volume, so I had to jack the volume on my receiver to +12.5. I think it might have to do with the deivers for my soundcard (Audigy 2 ZS Laptop PCI card). I'm...
  18. Blu-ray | DVD | Disc Media Players
    Samsung has been a little inconsistent in Blacker than Black with their DVD players. Their 850 does BTB with HDMI, but if you use DVI, the color levels get messed up. The 941 doesn't do BTB with HDMI, but is ok with component . Secrets has not done a complete test of this specific model. Does...
Top