Home Theater Forum and Systems banner


  1. Peavey IPR2 7500

    Subwoofer Amps | High Pass Filters
    I have read and thought about different amps for HST18's my current selection was going to be the FP14000 Clone. lots of power several people have them does a great job etc., however I kept thinking what if it breaks what then so after rehashing everything I am going to go with the 7500. My only...
  2. Peavey amp and speakers

    System Setup and Connection
    Came across a pretty good deal I got Peavey Cs800X 2- 115DL 2- PV118 s My question is what would be the best way to run this? I was thinking about getting the IPR 1600 but not sure if I need that. I cannot find what the specs are for the 115DLs.
  3. Peavey IPR 240v capable?

    Subwoofer Amps | High Pass Filters
    Hi All First post at HTS. I live in South Africa and have ordered 2 SI 18's for my first DIY Sub build. I would like to power them with a Peavey IPR but need confirmation that the amp can run off the 240V supply voltage we use. Buying locally costs 40% more than importing with Amazon but I...
  4. peavey ipr2 7500 fan mod

    Subwoofer Amps | High Pass Filters
    I just bought a peavey ipr2 7500 to replace my ep2500, i did the fan mod on the behringer and it was very easy so I'd like to do the same with the peavey (I assume it'll be loud as well). I can't really find good info on the peavey however, all I really need are the specs for the fans so I can...
  5. Peavey CS4000 Amplifier?

    Pro Audio
    Hi Folks, I currently have two Yamaha P7000s amps each operating in bridged mono mode. They are driving dual subs, namely a DIY LMS 5400 18" sub with dual 18" passive radiators. The PE7000s replaced two Crown CE4000 as I wanted fanless or whisper quiet operation (fan noise not audible 10 ft away...
  6. Peavey IPR2 owners?

    Subwoofer Amps | High Pass Filters
    Hi Everyone, I'm looking to replace my failed Peavey IPR 3000 DSP and the IPR2 series looks more like the Crest Prolite 2.0 stuff which means it might have better reliability. Does anyone have an IPR2 amp, namely the 3000, and can verify the heat sink size, if any? I may just order one to see...
  7. Peavey IPR 3000 question

    Subwoofer Amps | High Pass Filters
    quick question. I haven't been able to find the answer in my googling.. I'm considering picking up the Peavey IPR 3000 to power a pair of 18 inch Stereo integrity's and have been waffling on amps. I found the IPR 3000 (not the IPR2 series) for $350 brand new... is the 840 watts into 4ohm specs...
  8. Need advise for Sonotube with Peavey Low Rider 18!

    Ported Subwoofer Build Projects
    My first sonotube project so I would appreciate any help! I have the 24" sonotube and have a Peavey low rider 18" sub I would like to use. Bought a Precision 6" flared port. Peavey recommends for a large cabinet being 255L tuned to 30hz. When input all the info in the sonotube software I came...
  9. Peavey CS800X anyone run this?

    Subwoofer Amps | High Pass Filters
    Just hit a Craigslist find for $40. yup, delivered, for real. Even had a PL2 transformer in it. It's pretty clean for a used CS-800X 100% working heavy pro amp. Currently bridged mono into my sonosub sporting a Dayton Titanic 4ohm. So far so good gotta say I'm real happy with the output and...
  10. Help me connect my Peavey IPR DSP3000 amp

    Subwoofer Amps | High Pass Filters
    I'm new to this type of amp/connections and have a few questions on how to connect my Yamaha receiver-amp- sub combination; 1. Do I need one RCA(male) to XLR(male) cable to go from the one sub preout output of my receiver to one of the Peavey's XLR (Either A/B) inputs or do I need two RCA(male)...
  11. Peavey USB mixer with REW

    REW Forum
    Thanks brucek for answering my previous post so quickly. I thought that ASIO drivers might be the problem. I put this on a new thread and title so maybe more folks would read it. I've installed a music venue that I need to voice ASAP; it's my main reason for researching these RTA programs...