After years of using an Oppo BluRay player as a preamp/processor, I now am using a Nuforce AVP-18 processor that only accepts HDMI inputs, which is fine as all of my sources are digital. I have read that REW now will allow signals to be generated through a HDMI cable and I am anxious to use REW...
Please bear with me...very noob thread. Trying to use REW for a car audio application. Got the UMIK-1 mic and calibration file. I am really thrown off by inexplicable noise floor measurments taken with the mic on it's tri-pod, in the house with nothing else on (silent as possible)?? I've gone...
I'm just learning how to use REW, pretty nice piece of software it is! There is just one thing; while doing the soundcard calibration with the loopback connection, I've noticed that frecuency response varies a lot depending if the phantom power +48v on the mic input is ON or OFF (good...
If you are an Ed Harris or Duchovny fan as I am you will be pleased to know that Phantom will be released in the US on June 25th on DVD and Blu-ray. I saw a screening before it was released to theaters and if you can get passed the lack of Russian accents, it really is a taught thriller with a...
I just received my ECM8000 and tried to use it with a Hosa XLR female to RCA adapter to connect to the UCA 202 but it does not seem to work.
One of the pins in the Hosa adapter seems to be loose so that could be the reason.
I am planning to pickup a new RCA female to XLR cable next...
I'm a new user of Home Theatre Shack, and have just started trying to use Room EQ Wizard :)
I've purchased a Behringer ECM8000 Microphone, and have this connected to a Behringer PS400 Phantom Power Supply.
The output from this is XLR, so I have an XLR to 1/4" Stereo Jack lead, and...
Wouldn't this work to power my omni?
I already have a whole stationary REW setup with preamp/phantom etc....this would be just for a mobile laptop setup.
**Edit: ....and another...
Hallo to everyone here, this is my first post in this interesting forum.
I've been searching for a good measurement solution for Macs and finally came here. I had a very old Clio measurement system running on an 486 with DOS (Yes, that old!) and it finally gave up definitely.
For a while I used...
Hello All! I've been trying to follow the many posts about the various Behringer products and the many reply's and assistance you guys/gals have offered about their products. I just ordered the ECM 8000 mic and the MICROPOWER PS400 Phantom power supply. I have made a bid on ebay for the...
Just thought I would post this as I bought this CD and it has some really good bass in it and people with good subs will certainly be grinning when they hear it, track 4 is my favourite but the rest is also good too :bigsmile:
nor elle - phantom of life
worth a listen :wave:
I have just bought the Behringer DEQ2496 and a ECM8000 mic for my new DIY sub. I would really like to make a frequency sweep with REQ and see the response curve of my sub, so I can flatten it with the DEQ.
But what exactly do I have to buy to connect the ECM8000 to my PC? I have found this XLR...
"Star Wars: Episode I: The Phantom Menace" DD-EX THX
1. THX Intro
2. Ambush, Chap 3 (0:05:12)
3. Start Your Engines, Chap 20 (1:00:00)
4. Pod Race - Tunnel Exit, Chap 20 (1:01:40)
5. Into The Canyon, Chap 20 (1:02:00)
6. Chap 20 (1:03:35) 26Hz
I've a HP mini-note book and I need an external USB sound card that meets the following criteria's
-works with ECM8000. That requires it to have phantom power
-is Vista 32-bit/64-bit compatible.
People here seems to use M-Audio pre but some people does not seem to like it.
E-MU Tracker Pre USB...
I plan to use a DEQ2496 with an ECM8000. I have read the DEQ2496 manual, but cannot figure out if the phantom power on the DEQ2496 allows output of the ECM8000 into my soundcard.
Do I still need to buy a mic preamp like the 802? It looks like it just works with DEQ2496.
I am using a SoundMax...
This is a great site, way over my head at the moment.
The question i have is: i want to power a behringer ecm8000. Everyone here uses the behringer xenyx 802.
What is the advantage of this over say just a 48v phantom mic module?
i will leave my questions at that at the moment...
Hello, I think that I found an interesting product : Fast Track Pro - 4 x 4 Mobile USB Audio/MIDI Interface with Preamps
This external module includes :
Microphone XLR input with Phantom power to plug the EMC 8000 Mic. (replace my external mixer)
Midi interface to control the filters on the...
Ive been seeing lots of people using their existing sound card and getting a cheap $60 mixer to use for calibration.
If one is in need of a sound card too, like myself, why not consider the E-Mu 0404 external card...